Simplify the expression below:
313 + 12 =
ANSWER :
325
Explanation:
313 + 12 = 325
What computer program can you use to publish and share a research project with others?
Excel Charts
Email application
Pie chart program
Word Online
Answer:
Word Online is the program
Why weren’t car produced during world war 2
Answer:
Auto production stopped on Feb. 9, 1942, as factories switched over to making munitions for World War II. The industry retooled plants that could be adapted.
Answer:
9, 1942, as factories switched over to making munitions for World War II. The industry retooled plants that could be adapted. Car manufacturing equipment was replaced with what was needed to make planes and tanks, and floors were reinforced to carry the load of heavier machinery, according to Life magazine
Explanation:
2. Create the Kmaps and then simplify for the following functions (leave in sum-of-products form):
F(w,x,y,z) = w'x'y'z + w'x'yz' + w'xy'z + w'xyz' + w'xyz + wxy'z + wxyz + wx'y'z
F(w,x,y,z) = w'x'y'z' + w'z + w'x'yz' + w'xy'z' + wx'y
F(w,x,y,z) = w'x'y' + w'xz + wxz + wx'y'z'
The simplified sum-of-products forms for the given functions are:
F(w, x, y, z) = x'z + y'z + wx + wy + xyz
F(w, x, y, z) = x'z' + w'z + y'z + w'x'y + wx'y'
F(w, x, y, z) = w'x'y'z + w'x'yz' + w'xy'z + w'xyz' + w'xyz + wxy'z + wxyz + wx'y'z To simplify this function using K-maps, we create K-maps for each variable, w, x, y, z. The resulting simplified expression in sum-of-products form is x'z + y'z + wx + wy + xyz.
F(w, x, y, z) = w'x'y'z' + w'z + w'x'yz' + w'xy'z' + wx'y'
Creating K-maps for each variable, we simplify the function and obtain the simplified expression: x'z' + w'z + y'z + w'x'y + wx'y'.
F(w, x, y, z) = w'x'y' + w'xz + wxz + wx'y'z'
Using K-maps, we simplify the function to obtain the expression: x'z + y'w + wx + wy + xyz.
Karnaugh maps, or K-maps, provide a graphical method for simplifying boolean functions. The maps are constructed by representing the input variables in a grid and labeling the cells with the corresponding function values. Adjacent cells with a value of 1 are grouped together to form the simplified terms. The resulting terms are combined to obtain the simplified sum-of-products form.
In the given functions, the K-maps were created for each variable and the grouping of adjacent cells was performed to minimize the number of terms. The simplified expressions were obtained by combining the grouped cells, resulting in the final sum-of-products forms.
Learn more about boolean here: https://brainly.com/question/13265286
#SPJ11
an error occurred inside the server which prevented it from fulfilling the request.
Network structure analysis: The first and foremost thing you need to do is analyze your network structure.
The "Server error in '/' application" error message could arise if IIS has to be restarted. IIS Manager enables you to restart IIS. Administrative Tools may be accessed by clicking "Start" in the lower left-hand corner of your Remote Desktop connection. Panel in the "Administrative Tools" window Your browser's cookies should be deleted. You may fix many 500 Internal Server Error issues by deleting the cookies related to the website where the error is occurring. After deleting the cookie(s), restart the browser and attempt once more. Investigate a 504 Gateway Timeout issue instead. A 500 internal server error, as the name implies, denotes a widespread problem with the server that supports the website. This generally means that there is a bug or temporary error in the website's programming.
To learn more about network click the link below:
brainly.com/question/15002514
#SPJ4
Kendal is working on a document with a SmartArt object. The SmartArt is obscured by a picture. In order to ensure the SmartArt is visible, she should do which of the following?
1. Bring the SmartArt object to the front.
2. Align the SmartArt object to the top.
3. Change the text wrapping to In Front of Text.
4. Set the vertical alignment to Top.
The correct answer to the question is option 1. In order to ensure the SmartArt is visible, Kendal should bring the SmartArt object to the front.
What is SmartArt? SmartArt is a new feature in Microsoft Office applications that enables users to create diagrams and charts to represent information graphically. Excel, Outlook, PowerPoint, and Word all support SmartArt graphics. This tool lets you quickly create an amazing graphic that can be customized to your specific needs, making it easier to present complex data with clarity and style. Therefore, to ensure the SmartArt is visible, Kendal should bring the SmartArt object to the front.
To ensure that the SmartArt object is visible and not obstructed by other elements such as pictures in Microsoft Office applications like Excel, Outlook, PowerPoint, or Word, Kendal should bring the SmartArt object to the front. By bringing the SmartArt object to the front, it will be positioned in a higher layering order compared to other objects, allowing it to appear in front of the picture and ensuring its visibility.
This adjustment in layering order can be done within the application's interface, usually through options like "Bring to Front" or "Move Forward" available in the formatting or arrange menus. By selecting these options for the SmartArt object, Kendal can ensure that it is positioned above the picture and easily visible to viewers. This way, SmartArt can effectively present complex information in a visually appealing and comprehensible manner.
It's important to note that SmartArt is a powerful feature that allows users to create dynamic and customizable diagrams and charts, aiding in the effective communication of data. By bringing the SmartArt object to the front, Kendal can maximize its impact and ensure that it is prominently displayed within the document or presentation.
Learn more about SmartArt at:
brainly.com/question/31496794
#SPJ11
pressure tunnel and tunnel lining are the types of tunnels?
Answer:
the support system of tunnel or shaft
Explanation:
i just looked it up
Which two sentences in this excerpt from john barth's "lost in the funhouse" show the postmodern element of self-reflexivity?
The two sentences that show the postmodern component of self-reflexivity in this passage from John Barth's "Lost in the Funhouse" are referenced underneath.
"Initials, spaces or both were frequently fill in for legitimate names in nineteenth-century fiction to improve the deception of the real world."
"Curiously, similarly as with different parts of authenticity, a deception is being upgraded, by simply counterfeit means."
Postmodernism is a philosophical and social development that arose in the mid-to-late twentieth hundred years. It essentially affects different fields, including writing, craftsmanship, music, engineering, and theory.
Learn more about self-reflexivity , from:
brainly.com/question/28539818
#SPJ12
This is silence I couldent find the tab... 30 points plus marked brainliest if corrects!
The most recent evidence supporting the theory of plate tectonics would include
es )
A)
GPS monitoring of plate speeds and movements.
B)
the WWII discovery of paleomagnetic reversals.
Elimi
O
the 1963 mapping of the tectonic plate boundaries.
D
C-14 dating of marine fossils found in the Himalayas.
Denali wants to store information about all Windows updates on a specific Microsoft SQL Server for security reasons Which of the following wizards can Denalt use to set up SQL Server Connectivity to store update information? O The Group Policy Results Wizard O The Windows Server Updates Services Configuration WizardO The Add Roles and Features Wizard O The Certificate Enrollment wizard
Group policy wizard can Denali to set up SQL server connectivity to store update information.
What is microsoft SQL Server?
A relational database management system (RDBMS) called Microsoft SQL Server serves a wide range of business intelligence, analytics, and transaction processing applications in corporate IT environments.
For security reasons, Denali wishes to save information about all Windows updates on a dedicated Microsoft SQL server.
Denali may utilize the Group Policy Result Wizard to set up SQL server connection for storing update information.
Therefore, the correct option is A. The Group Policy Results Wizard.
To learn more about Microsoft SQL server from the given link.
https://brainly.com/question/13275417
#SPJ4
For C programming language,
Create a structure called student that has fields for name, id and age. The field name is a char array, id is an integer and age is double type. In the main program create an array of size 5 and pass this array to a function to populate the array with user data. The main program must create a file and save this information to a file (one line for each student). Write a second program to read each line of the file created in part-1 and save it back to an array of structure student (same as the structure created in part-1). Then find the name of the oldest student.
Create student struct, populate array, save/read to file, find oldest.
How to create, save and read student data in C?Here's an example implementation of the requirements in C programming language:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define MAX_STUDENTS 5
#define MAX_NAME_LENGTH 50
// Define the structure for a student
struct student {
char name[MAX_NAME_LENGTH];
int id;
double age;
};
// Function to populate the array with user data
void populate_students(struct student students[]) {
for (int i = 0; i < MAX_STUDENTS; i++) {
printf("Enter name, id and age of student %d: ", i + 1);
scanf("%s %d %lf", students[i].name, &students[i].id, &students[i].age);
}
}
// Function to save student data to a file
void save_students_to_file(struct student students[], const char* filename) {
FILE* fp = fopen(filename, "w");
if (fp == NULL) {
printf("Error opening file for writing\n");
exit(1);
}
for (int i = 0; i < MAX_STUDENTS; i++) {
fprintf(fp, "%s %d %lf\n", students[i].name, students[i].id, students[i].age);
}
fclose(fp);
}
// Function to read student data from a file
void read_students_from_file(struct student students[], const char* filename) {
FILE* fp = fopen(filename, "r");
if (fp == NULL) {
printf("Error opening file for reading\n");
exit(1);
}
char name[MAX_NAME_LENGTH];
int id;
double age;
int i = 0;
while (fscanf(fp, "%s %d %lf", name, &id, &age) != EOF && i < MAX_STUDENTS) {
strcpy(students[i].name, name);
students[i].id = id;
students[i].age = age;
i++;
}
fclose(fp);
}
// Function to find the name of the oldest student
char* find_oldest_student_name(struct student students[]) {
int max_age_index = 0;
for (int i = 1; i < MAX_STUDENTS; i++) {
if (students[i].age > students[max_age_index].age) {
max_age_index = i;
}
}
return students[max_age_index].name;
}
// Main program
int main() {
struct student students[MAX_STUDENTS];
// Populate the array with user data
populate_students(students);
// Save student data to a file
save_students_to_file(students, "students.txt");
// Read student data from a file
struct student students_from_file[MAX_STUDENTS];
read_students_from_file(students_from_file, "students.txt");
// Find the name of the oldest student
char* oldest_student_name = find_oldest_student_name(students_from_file);
printf("The name of the oldest student is %s\n", oldest_student_name);
return 0;
}
This program defines a structure called student with fields for name, id, and age. It creates an array of size 5 of this structure, populates it with user data, and saves it to a file. Then it reads the data back from the file into another array of the same structure and finds the name of the oldest student in the array.
Learn more about C programming
brainly.com/question/30941216
#SPJ11
HOW TO CALCULATE MARGINAL RATE
Answer:
Divide the difference in tax by the amount of income from the investment, and you'll get the economic marginal tax rate from investing. Most people refer to marginal tax rates as being identical to tax brackets.
hope this helps
have a good day :)
Explanation:
“We’re late for homeroom,” said Bonnie, surprised to hear herself say “we.” “EARL is a tool, Bonnie’s mother kept reminding her, not a friend or a puppy. ‘Don’t anthropomorphize it, honey,’ Bonnie’s mom said one night after she found Bonnie dancing around her bedroom with the metal contraption. ‘It’s a walking blender. Never forget that.”
QUESTION: What does, "Anthropomorphize" means in the sentences above?
(A) It means to program a robot so that it acts in a robotic or unnatural way?
(B) Or it means to give human characteristics to an object or animal?
(C) To make a human act more like an animal and less of a human?
(D) Or to make a human act more like an animal and less of a human?
Answer correctly
Will give Brainliest, a THX, friend request, and will rate ur answer
Answer:
Hi there
Your answer is:
B.
Explanation:
The "metal contraption", as the text goes on to say, is treated like a friend to Bonnie. Her mom comments on this by contrasting the metal contraption to a puppy.
Hope this helps
why you think electric energy for households is generally supplied by power plants instead of by an electric generator at each house
Answer:
Bcause if not the house would not have any thing to plugin or like have any internet
Explanation:
Which of the following is NOT considered a test to evaluate whether an engineer is in responsible charge of a project?
a. The project size as determined by its dollar value.
b. The engineer's technical knowledge of the work performed.
c. The geographical and organizational span of control exercised.
d. The engineer's ability to answer questions concerning the project.
The answer is "Option a", and more explanation can be defined as follows:
The method compares a system or parts with needs and demands through testing. The results are assessed to measure design development, performance, endurance, etc.The phrase "responsible charge" as used in the Professional Engineers Law directly refers to how much control a professional engineer is obliged to exercise independent direction and control over-engineering and creative work, as well as to the making the correct decision that can only be taken by a professional engineer.The description of the correct choice:
The technique of the engineer's work was done.The controlling span was carried out and in geography & organization.The ability of an engineer to address technical questions.Therefore, except for "Option a", all were right because tests for responsible charges consist of technical knowledge, the scope of control, and capability.
Learn more:
brainly.com/question/15180981
The shape of the wood beam is a rectangle. In a paragraph explain the tradeoffs an engineer would make in selecting a wood with a rectangle shape versus manufactured beams with other stronger but lighter weight shapes.
Answer:
Wood is heavy
Explanation:
The density of seawater at a free surface where the pressure is 98 kPa is approximately 1030 kg/m3. Taking the bulk modulus of elasticity of seawater to be 2. 34 109N/m2 and expressing variation of pressure with depth z as dp= rgdz determine the density and pressure at a depth of 2500 m. Disregard the effect of temperature. Recall that:(i) The bulk module of elasticity is defined as: (ii) Density is not assumed as constantin this problem
The pressure of seawater will be 2.14*107 N/m2 and the density will be 8.53*103 kg/m3.
What is pressure?Pressure is a type of force applied to an object by another object over a surface area. Pressure is measured in units of force per unit area and is usually expressed in terms of pascals (Pa).
The bulk modulus of elasticity, K, is a measure of the stiffness of a material and is defined as the ratio of bulk stress to the resulting strain. In this problem, we need to calculate the density and pressure at a depth of 2500 m, based on the given bulk modulus and 98 kPa pressure at the surface.
To solve this problem, we will use the equation K = -dp/dρ, where dp is the change in pressure with depth and dρ is the change in density with depth. Since we are given the bulk modulus and pressure on the surface, we can calculate the change in density with depth as follows:
dρ = -K*dp/dz
where dp = rgdz and rg is the gravity of the Earth. Substituting these values, we get:
dρ = -2.34*109*98*103/(9.8*2500) = -7.78*103 kg/m3
This means that for every metre of depth, the density of seawater decreases by 7.78*103 kg/m3. Therefore, at a depth of 2500 m, the density of seawater will be:
ρ = 1030 - 7.78*103*2500 = 8.53*103 kg/m3
Similarly, we can calculate the pressure at a depth of 2500 m using the equation P = P0 + rgdz, where P0 is the pressure at the surface. Substituting the values, we get:
P = 98*103 + 9.8*2500*8.53*103 = 2.14*107 N/m2
Therefore, at a depth of 2500 m, the pressure of seawater will be 2.14*107 N/m2 and the density will be 8.53*103 kg/m3.
To learn more about pressure
https://brainly.com/question/30129462
#SPJ4
the ____ layer forwards messages to their correct destinations.
The Transport layer forwards messages to their correct destinations.
The transport layer is the fourth layer of the OSI reference model that provides end-to-end communication services to applications.
This layer provides end-to-end transport services for applications. It ensures complete data transmission, fragmentation, and reassembly of messages.
It is also responsible for the integrity of data transmission.
To transfer data, the transport layer establishes a logical connection between two endpoints and transmits data over the logical link.
It ensures that all of the data sent by the transmitting computer is received correctly by the receiving computer. The transport layer is made up of two protocols, TCP and UDP.
To know more about data transmission
https://brainly.com/question/31919919
#SPJ11
Shops should avoid purchasing any material sold in ____________.
Answer: Aerosol Cans
Explanation: I just did the quiz
Suppose that 42\%42%42, percent of students of a high school play video games at least once a month. The computer programming club takes an SRS of 303030 students from the population of 792792792 students at the school and finds that 40\%40%40, percent of students sampled play video games at least once a month. The club plans to take more samples like this. Let \hat p p ^ p, with, hat, on top represent the proportion of a sample of 303030 students who play video games at least once a month. What are the mean and standard deviation of the sampling distribution of \hat p p ^ p, with, hat, on top? Choose 1 answer: Choose 1 answer: (Choice A) A \begin{aligned} \mu_{\hat p}&=0.42 \\\\ \sigma_{\hat p}&=\sqrt{\dfrac{0.42\left(0.58\right)}{30}} \end{aligned} μ p ^ σ p ^ =0.42 = 30 0.42(0.58) (Choice B) B \begin{aligned} \mu_{\hat p}&=(30)(0.42) \\\\ \sigma_{\hat p}&=\sqrt{30(0.42)(0.58)} \end{aligned} μ p ^ σ p ^ =(30)(0.42) = 30(0.42)(0.58) (Choice C) C \begin{aligned} \mu_{\hat p}&=(30)(0.4) \\\\ \sigma_{\hat p}&=\sqrt{30(0.4)(0.6)} \end{aligned} μ p ^ σ p ^ =(30)(0.4) = 30(0.4)(0.6) (Choice D) D \begin{aligned} \mu_{\hat p}&=0.4 \\\\ \sigma_{\hat p}&=\sqrt{\dfrac{0.4\left(0.6\right)}{30}} \end{aligned} μ p ^ σ p ^ =0.4 = 30 0.4(0.6)
Answer:
its A, first choice on khan
Explanation:
The Van der Pol oscillator (describes oscillations in electrical circuits employing vacuum tubes) is described by the following second order differential equation: 24-u(1 – r?) *x + x = 0 Let the initial conditions be: x(0) = 2, x'(0) = 0 (a) Rewrite the ODE as a system of first order ODES (b) Let = 1. Perform two iterations using Euler's method using a step size of 0.1 [10 (c) We are going to solve the above problem in Matlab using ode45. Write the mfile that defines the system of ODEs from part(a). This is the function call used by the ode solver)
In this problem, we were given the Van der Pol oscillator second-order differential equation and were asked to rewrite it as a system of first-order ODEs, perform two iterations of Euler's method, and solve the problem using ode45 in Matlab.
The initial conditions were also provided as x(0) = 2 and x'(0) = 0.To begin, we rewrote the second-order differential equation as a system of first-order ODEs. We defined a new variable y = x' and obtained the following system:
x' = y
y' = -x + (1 - r*y^2)*y
Next, we performed two iterations of Euler's method using a step size of 0.1 and the value of r equal to 1. We obtained the following solutions:
x(0.1) = 2
y(0.1) = -0.24
x(0.2) = 1.9752
y(0.2) = -0.375696
Finally, we wrote the mfile in Matlab that defines the system of ODEs as a function call used by the ode solver, ode45. The function takes in a time vector t and a state vector z, where z(1) corresponds to x and z(2) corresponds to y. Inside the function, we define the derivatives of x and y as described in the system of first-order ODEs.
Overall, this problem required us to manipulate the given second-order differential equation into a system of first-order ODEs, perform numerical iterations using Euler's method, and write a function that can be used by the ode solver in Matlab.
To learn more about Van der Pol oscillator click van der pol oscillator brainly.com/question/31986920
#SPJ11
this is a mobility synthesis problem. the goal of the mobiltity synthesis is to design the type/topology of a linkage for specified mobility (dof). show the equations used to determine the answers and submit your complete work in the written part.
Mobility synthesis involves finding the appropriate linkage type and topology for a given degree of freedom (DOF). The specific equations used depend on the desired DOF.
How to explain the mobilitySome common methods include:
Four-bar linkage: This is used for creating planar motion with 1 DOF, such as a crank-slider mechanism. The input and output velocities can be determined using the law of cosines.
Six-bar linkage: This is used for creating planar motion with 2 DOFs, such as a double crank mechanism. The input and output velocities can be determined using the law of cosines and the law of sines.
Eight-bar linkage: This is used for creating planar motion with 3 DOFs. The input and output velocities can be determined using the law of cosines, the law of sines, and vector loop equations.
Stewart-Gough platform: This is used for creating spatial motion with 6 DOFs. The input and output velocities can be determined using the screw theory.
It is important to note that for each linkage type, the specific equations and calculations required will depend on the design specifications and constraints.
In order to complete this mobility synthesis problem, you should determine the desired DOF, choose an appropriate linkage type, and perform the necessary calculations and analysis to determine the linkage topology that satisfies the requirements.
An overview was given based on the incomplete information.
Learn more about mobility on:
https://brainly.com/question/10185143
#SPJ1
Which of the following are desirable characteristics of refractory ceramics?
a. Ability to remain unreactive and inert in severe environments.
b. Ability to withstand high temperatures.
c. Ability to withstand low temperatures.
d. High strengths.
e. Thermally insulative.
the following are desirable characteristics of refractory ceramics
a. Ability to remain unreactive and inert in severe environments.
b. Ability to withstand high temperatures.
d. High strengths.
e. Thermally insulative.
The ability to withstand high temperatures is essential for refractory ceramics, as they are often used in high-temperature applications such as furnaces and kilns. The ability to remain unreactive and inert in severe environments is also important to ensure that the material does not react with the surrounding environment or other materials in the system, which could lead to degradation or failure of the component. High strength is desirable to prevent fracture or deformation under mechanical loads. Lastly, being thermally insulative is useful for applications where heat needs to be contained or controlled within a given space.
Know more about refractory ceramics here:
https://brainly.com/question/31874920
#SPJ11
When choosing a respirator for your job, you must conduct a
test.
For welding the most important reason to use jigs and fixtures in a welding shop is to
Answer:
Reduce manufacturing costs.
Explanation:
Hope This Helps
Have A Great Day
An Ideal gas is being heated in a circular duct as while flowing over an electric heater of 130 kW. The diameter of duct is 500 mm. The gas enters the heating section of the duct at 100 kPa and 27 deg C with a volume flow rate of 15 m3/s. If heat is lost from the gas in the duct to the surroundings at a rate of 80 kW, Calculate the exit temperature of the gas in deg C. (Assume constant pressure, ideal gas, negligible change in kinetic and potential energies and constant specific heat; Cp =1000 J/kg K; R = 500 J/kg K)
Answer: The exit temperature of the gas is \(32^{o}C\).
Explanation:
The given data is as follows.
\(C_{p}\) = 1000 J/kg K, R = 500 J/Kg K = 0.5 kJ/kg K (as 1 J = 0.001 kJ)
\(P_{1}\) = 100 kPa, \(V_{1} = 15 m^{3}/s\)
\(T_{1} = 27^{o}C\) = (27 + 273) K = 300 K
For the given gas we assume that it is an ideal gas with constant pressure, negligible change in kinetic and potential energy, constant specific heat. At inlet,
\(P_{1}V_{1} = mRT_{1}\)
or, m = \(\frac{P_{1}V_{1}}{RT}\)
= \(\frac{100 \times 15}{0.5 \times 300}\)
According to steady flow energy equation,
\(mh_{1} + Q = mh_{2} + W\)
or, \(h_{1} + \frac{Q}{m} = h_{2} + \frac{W}{m}\)
\(C_{p}T_{1} - \frac{80}{10} = C_{p}T_{2} - \frac{130}{10}\)
\((T_{2} - T_{1}) \times C_{p} = \frac{130 - 80}{10}\)
\((T_{2} - T_{1})\) = 5 K
\(T_{2}\) = (300 + 5) K = 305 K or \(32^{o}C\) (as \([305 - 273]^{o}C = 32^{o}C\))
Thus, we can conclude that exit temperature of the gas is \(32^{o}C\).
An elevation is.... * 10 points a. A detailed description of requirements, composition and materials for a proposed building. b. A view of a building seen from one side, a flat representation of one façade. This is the most common view used to describe the external appearance of a building. c. The development of the last remaining lots in an existing developed area, the new development within an area already served by existing infrastructure and services, or the reuse of already developed, but vacant properties. d. The practice of creating structures and using processes that are environmentally responsible and resource-efficient throughout a building's life-cycle from siting to design, construction, operation, maintenance, renovation and deconstruction.
Answer:
b. A view of a building seen from one side, a flat representation of one façade. This is the most common view used to describe the external appearance of a building.
Explanation:
An elevation is a three-dimensional, orthographic, architectural projection that reveals just a side of the building. It is represented with diagrams and shadows are used to create the effect of a three-dimensional image.
It reveals the position of the building from ground-depth and only the outer parts of the structure are illustrated. Elevations, building plans, and section drawings are always drawn together by the architects.
What can be defined as the planning, coordination, and communications functions that are needed to resolve an incident in an efficient manner?
Incident handling can be defined as the planning, coordination, and communications functions that are needed to resolve an incident efficiently.
What is incident handling?In the areas of computer protection and transmission technology, computer safety incident surveillance involves the monitoring and detection of security occurrences on a computer or computer network and the execution of proper answers to those circumstances. Especially, a happening reaction process is an assemblage of strategies aimed at identifying, analyzing, and responding to potential security happenings in a way that underestimates impact and supports rapid comeback. Incident handling is a systematic set of recovery tactics for the restoration of organizational security. Given that adversaries have already damaged the institution's protection, this healing is always time-critical and usually stressful.To learn more about Incident handling, refer to:
https://brainly.com/question/13146949
#SPJ4
If substance A has molecules moving at a high rate and substance B has molecules moving at a low rate, which substance has the lower temperature?
Answer:
substance B
Explanation:
A germanium diode carries a current of 1 mA at room temperature when a forward bias of 0.15v is applied. Estimate the reverse saturation current at room temperature.