what is an example of a law of gravity and a theory of gravity.
What is the difference in what they aim to explain? I don't
understand what they aim to explain and how they are different?

Answers

Answer 1

Law of gravity: Describes force of attraction between masses based on their product and distance.
Example: Newton's Law of Universal Gravitation.

Theory of gravity: Explains gravity as spacetime curvature caused by mass and energy.
Example: Einstein's General Theory of Relativity.

Explanation

Newton's Law of Universal Gravitation is an illustration of a gravity law. According to this theory, every particle of matter in the cosmos attracts every other particle with a force that is inversely proportional to the square of the distance between them and directly inversely proportional to the product of their masses. This rule offers a framework for determining the gravitational attraction between objects and seeks to quantitatively characterise the force of gravity. It focuses on the observed behaviour of mass-containing objects and offers a gravitational interaction prediction connection.

One illustration of a theory of gravity is Einstein's Theory of General Relativity. It offers a thorough explanation of gravity as the bending of spacetime brought on by the existence of mass and energy. This theory states that the distribution of mass and energy affects the curvature of spacetime, which in turn affects the velocity of things. The theory explains gravity as a product of spacetime geometry rather than a force operating at a distance as Newton's law would imply. It offers a more comprehensive framework that includes and explains a variety of phenomena, such as the behaviour of black holes, the bending of light, and the precession of planetary orbits.

A theory of gravity and a law of gravity differ primarily in their applicability and level of explanation. Law offers a mathematical connection based on observations and experiments to describe a particular phenomenon, in this example, the force of gravity. One such rule is Newton's Law of Universal Gravitation. It offers a forecasting tool that concentrates on a certain characteristic or behaviour.

You can learn more about the Law of Gravity and Theory of Gravity here:

https://brainly.com/question/32684591

# SPJ4


Related Questions

The wheel of a certain bus are 2m apart and the bus falls over when it is tilted sideways at 45degree angle with vertical. What is the tension in each rope

Answers

Answer:

F = m g / 4,  F = 12250 N

Explanation:

For this exercise we must use the rotational equilibrium relation

          ∑τ = 0

let's set a reference system on the wheel where the bus is turning and that the anti-clockwise rotations have been positive

          -2F x_string + W x_bus = 0

          x_bus =\frac{l}{2} cos 45

          x_string = l cos 45

where F is the force on each wheel and W the weight of the bus ,, we assume that the center of mass is in the middle and x_bus is the perpendicular distance from the center of mass to the turning point.

             2F l cos 45 = W \(\frac{l}{2}\)  cos 45

             F = m g / 4

to finish the calculation we must assume a mass for the bus m = 5000 kg

             F = 5000 9.8 / 4

              F = 12250 N

How are plants propagated using
leaf and leaf-bud cuttings?

How are plants propagated usingleaf and leaf-bud cuttings?

Answers

Remove a leaf and include up to 11⁄2 inches of the petiole. Insert the lower end of the petiole into the medium (Figure 1). One or more new plants will form at the base of the petiole. The new plants are then severed from the original leaf-petiole cutting and the cutting may be used once again to produce more plants.

what can i about charges that were made against me but dropped by the pwerson who made them but are still on record

Answers

If you have charges that were made against you but were dropped by the person who made them but are still on record, you can still take steps to address the situation. It is important to note that having charges on your record can have negative effects on your life, such as hindering your ability to secure employment and housing.

To address this situation, you may need to seek legal advice or the assistance of a criminal defense attorney. They will be able to guide you through the process of getting the charges removed from your record, or having them expunged. This will involve filing a petition to the court, providing evidence that the charges were dropped, and demonstrating that you meet the eligibility criteria for expungement or record sealing

. The process may vary depending on your location and the type of charges you faced, so it is important to seek guidance from a legal professional.To summarize, if you have charges that were made against you but were dropped by the person who made them but are still on record, you can seek legal advice or the assistance of a criminal defense attorney to have the charges removed from your record through a petition to the court.

To know more about charges visit:

https://brainly.com/question/29767138

#SPJ11

What process involves heavier atoms breaking down into lighter atoms?

Answers

Answer:

Fission occurs when a neutron slams into a larger atom, forcing it to excite and split into two smaller atoms—also known as fission products. Additional neutrons are also released that can initiate a chain reaction. When each atom splits, a tremendous amount of energy is released.

Explanation:

Answer:

Fission

Explanation:

this happens when the neutrons an atoms slams into a larger atom, forcing it to split into two smaller atoms

At what distance should an object be placed from a convex lens of focal length 18cm to obtain an image at 24cm if on the other side. What will be the magnification produced in this case?

Answers

The distance should an object be placed from a convex lens of focal length 18cm to obtain an image at 24cm if on the other side is 72 cm and the magnification produced in this case is 1/3.

The formula to calculate the magnification is: magnification (m) = - (v/u). In order to calculate the distance of the object from the lens, we can use the lens formula:1/f = 1/v - 1/u, where f is the focal length, v is the distance of the image from the lens and u is the distance of the object from the lens. Substituting the given values in the formula we get:1/18 = 1/-24 - 1/u

On solving this equation we get u = -72 cm. (Negative sign indicates that the object is placed at the left-hand side of the lens).

Now substituting the values of v and u in the formula of magnification, we get: magnification (m) = - (v/u) = - (-24/-72) = 1/3

The object should be placed at a distance of 72 cm on the left-hand side of the lens to get an image at 24 cm on the other side. The magnification produced in this case is 1/3.

Learn more about magnification at:

https://brainly.com/question/27872394

#SPJ11

Help help help please help

Help help help please help

Answers

hii

Explanation:

question: 1 Answer: the second answer

question: what is one importance of sea ice ? answer: "reflecting sunlight back into space, regulating ocean and air temperature, circulating ocean water, and maintaining animal habitats." so either 1 or 3

question: 2 Answer: Species become endangered for two main reasons: loss of habitat and loss of genetic.

1: 2, the ice melts and keeps the ocean salty because of all the salt in the ice
2. (i’m not sure abt this one, go off the other persons answer if i had to geuss tho it would be 2?)
3. animals could go extinct bc their habitat is meant to be cold, they are meant for the cold weather but global warming is making the cold spots warm and warm spots even warmer and because the cold spots are becoming gold the animas made for cold might not make it through the warmer weather.

hope this helps:)

if a student varies a string’s tension and measures its wave velocity , what regression analysis should be used to get the string’s linear density ?

Answers

Linear regression analysis should be used to get the string’s linear density.

In physics, the wave velocity of a string is related to its linear density by a linear equation. When a student varies the string's tension and measures its wave velocity, a linear regression analysis can be used to determine the slope of the line, which corresponds to the string's linear density.

Linear regression analysis is a statistical method used to identify the linear relationship between two variables and is appropriate for this scenario because there is a linear relationship between wave velocity and linear density.

The linear regression analysis will help to find the slope of the line which represents the linear density of the string.

For more questions like Velocity click the link below:

https://brainly.com/question/30559316

#SPJ11

PLEASE HELP!!!! A single-celled, microscopic organism, Paramecium caudatum (P. caudatum), was grown in a container with food and freshwater. The growth rate of the P. aurelia population is shown in the graph.

5c78ed99-a73d-456f-987a-379358e65942.jpeg



a. Use the information and graph to describe the relationship among time, food, and the P. Aurelia population.





b. Predict how the P. aurelia population would most likely change if another microscopic organism, Paramecium caudatum (P. caudatum), is added on day 17 to the same container with no additional food or freshwater. Assume that P. caudatum is not a predator of P. aurelia and that both species use the same food. Provide reasoning for your prediction.

Answers

Sorry this is bio.I don’t know this thing

What is the change of GPE for a 8.0 kg object which is lowered from an initial height of 10 m above the floor to a final height of 4.0 m above the floor?

Answers

The change in gravitational potential energy, GPE for the 8 Kg object which is lowered from a height of 10 m to 4 m is -470.4 J

How do I determine the change in potential energy of the object?

We'll begin by obtaining the initial potential energy. Details below:

Mass of object (m) = 8 KgInitial height (h₁) = 10 mAcceleration due to gravity (g) = 9.8 m/s² Initial potential energy (PE₁) = ?

PE₁ = mgh₁

PE = 8 × 9.8 × 10

PE = 784 J

Next, we shall determine the final potential energy. Details below:

Mass of object (m) = 8 KgInitial height (h₂) = 4 mAcceleration due to gravity (g) = 9.8 m/s² Final potential energy (PE₂) = ?

PE₂ = mgh₂

PE = 8 × 9.8 × 4

PE = 313.6 J

Finally, we shall determine the change in the potential energy. This is shown below:

Initial potential energy (PE₁) = 784 JFinal potential energy (PE₂) = 313.6 JChange in potential energy (ΔPE) =?

ΔPE = PE₂ - PE₁

ΔPE = 784 - 313.6

ΔPE = -470.4 J

Thus, the change in potential energy is -470.4 J

Learn more about potential energy:

https://brainly.com/question/22274239

#SPJ1

A mass, M, is at rest on a frictionless surface, connected to an ideal horizontal spring that is unstretched. A person extends the spring 30 cm from equilibrium and holds it at this location by applying a 10 N force. The spring is brought back to equilibrium and the mass connected to it is now doubled to 2M. If the spring is extended back 30 cm from equilibrium, what is the necessary force applied by the person to hold the mass stationary there

Answers

Answer:

The necessary force applied by the person to hold the mass stationary there is 10 N

Explanation:

We are told that this person extends the spring 30 cm from equilibrium and holds it at this location by applying a 10 N force.

Thus, based on Hooke's law formula which is F = k Δx, we can say that the mass attached to the spring does not change the spring constant. Thus, the

same resistive spring force will still be in place and in turn, the same stretching force of 10N would still be required.

Thus;

The necessary force applied by the person to hold the mass stationary there is 10 N

when is the mass of an object if it exerts a force of 160 N and an acceleration of 8.15m/s^2

Answers

Answer:

f=ma.......m=f/a......m=20kg

an object that is 16.00 cm tall is placed 838.00 cm in front of a concave mirror of focal length 74.00 cm. what is the image height?

Answers

Using the mirror and magnification formulas, the image distance and height are calculated to be -71.80 cm and 1.38 cm, respectively.

We can use the mirror formula to find the image height. The mirror formula is

1/f = 1/d_o + 1/d_i

where f is the focal length of the mirror, d_o is the object distance (distance of the object from the mirror), and d_i is the image distance (distance of the image from the mirror).

The distances are considered positive when measured to the right of the mirror (in the direction of the incident light), and negative when measured to the left.

First, we need to find the image distance. Since the object is placed in front of a concave mirror, the image is formed on the same side of the mirror as the object, and is real and inverted. Using the mirror formula and the given values, we get:

1/74 = 1/838 + 1/d_i

Solving for d_i, we get:

d_i = 1 / (1/74 - 1/838) = -71.80 cm

The negative sign indicates that the image is formed on the same side of the mirror as the object.

Next, we can use the magnification formula to find the image height. The magnification formula is

m = -d_i / d_o

where m is the magnification, which is negative for a real and inverted image.

Substituting the values we have found, we get

m = -(-71.80 cm) / 838.00 cm = 0.086

Finally, we can find the image height by multiplying the object height by the magnification

h_i = m * h_o = 0.086 * 16.00 cm = 1.38 cm

Therefore, the image height is 1.38 cm.

To know more about concave mirror:

https://brainly.com/question/31379461

#SPJ4

The change in velocity v of an object is zero over a short time interval t. Which of the following is true? Assume quantities are instantaneous unless stated otherwise.

The change in velocity v of an object is zero over a short time interval t. Which of the following is

Answers

Answer:

2. The object must have zero average acceleration over the interval.

Explanation:

Notes:

-Velocity can have zero change if it is either at rest or moving at a constant velocity. This also means there is zero acceleration (acceleration is any change in velocity).

-Velocity is also speed and direction, so if it changes direction (for example: moving backward or in a circle) it is not constant even if it has a constant speed. It also means the object is accelerating.

1: Nothing can be determined without additional information.

Incorrect, because it is solvable by the process of elimination.

2: The object must have zero average acceleration over the interval.

Correct, because zero acceleration equals zero change in velocity.

3: The object must be changing position.

Incorrect, because you don't know whether or not the object is accelerating.

4:  The object must have zero average velocity over the interval.

Incorrect, because this implies it is at rest. To have zero change, it can be at rest OR moving at a constant velocity.

5:  The object must have constant velocity over the interval.

Incorrect, because zero change in velocity can mean either be at rest OR moving at a constant velocity.

6: The object must begin and end at the same position.

Incorrect, because to begin and end at the same position implies that it was at rest or it changed direction while moving to end at the same position. (see Notes above for explanation)

7: The object must have constant acceleration over the interval.

Incorrect, because you can't have zero change in velocity if there is acceleration (Acceleration is any change in velocity).

8: The object must be at rest.

Incorrect, because to have zero change, it can be at rest OR moving at a constant velocity.

An object is pulled to the left by a force of 50 N. The same amount of force pulls it to the right. The object will ____.

A. Accelerate to the right
B. Accelerate to the left
C. change its direction
D. stay at rest

Answers

Required Answer:

The body will stay at rest (Option D). It is because a force of magnitude 50 N is pulled towards left and another force is pulling it towards right with same magnitude 50 N. So, the direction of force is opposite and magnitude is same i.e. 50 N. So, they will cancel each other and net force is 0. Hence, there would be no acceleration.

Option A - Showing acceleration Option B - Showing accelerationOption C - Change of direction due to Net force

Hence, these options are incorrect because they are only possible when net external force is non-zero. Staying at rest i.e. Option D means there is no motion and hence no acceleration, this shows that net force is 0\(.\)

━━━━━━━━━━━━━━━━━━━━

A collision where the objects stick together after impact is called a/an _______.

Answers

*-.Helloooo! Marie Here!!.-*

The answer is:

An/a inelastic collision

Hope This Helps! Have A GREATTT DAY!!!

A train car has a mass of 10,000 kg and is moving at +3.0 m/s. It strikes an identical train car that is at rest. The train cars combine.

Answers

Answer:

ok what is the question

Answer:

If the question is what is the magnitude of the final velocity of the combined cars ? Answer: 1.5 m/s

Explanation:

It takes a person 22 seconds to swim in a straight line from the south end of
a pool to the north end of the pool, a distance of 28 meters. What is the
swimmer's velocity?​

Answers

Answer:

1.27 m/s.

Explanation:

The following data were obtained from the question:

Displacement (D) = 28 m

Time (t) = 22 secs

Velocity (v) =?

Velocity is simply defined as the rate of change of displacement of an object with time. It can be represented mathematically as:

Velocity (v) = Displacement (D) /Time (t)

v = D/t

With the above formula, we can obtain the swimmer's velocity as follow:

Displacement (D) = 28 m

Time (t) = 22 secs

Velocity (v) =?

v = D/t

v = 28/22

v = 1.27 m/s

Therefore, the swimmer's velocity is 1.27 m/s.

Answer:

1.3 m/s north

Explanation:

A bicyclist is finishing her repair of a flat tire when a friend rides by with a constant speed of 4.8 m/s. Two seconds later the bicyclist hops on her bike and accelerates at 2.2 m/s2 until she catches up with her friend.

A. How much time, counting from the moment she hops on her bike, does it take until she catches up?

B. How far does she travel in this time?

Answers

Answer:

Explanation:

(4.8 m/s)t = 1/2(2.2 m/s²)t²

2(4.8 m/s)t / (2.2 m/s²) = t²

2(4.8 m/s) / (2.2 m/s²) = t²/t

t = 4.36 s

A.  total time it takes to catch up to friend = 4.36s + 2s = 6.36s    (took her 2 sec to hop on the bike and get going)

B. Distance she travels is the same distance the friend travels in 4.36 s = (4.8 m/s)(4.36 s) = 1/2(2.2 m/s²)(4.36 s)² = 20.9 m

In the time between two closest approaches to Earth, Venus rotates almost exactly five times relative to the Sun. The consequence of this is that:

Answers

Venus rotates very slowly on its axis, taking about 243 Earth days to complete a single rotation.

In addition, Venus's orbit around the Sun is shorter than Earth's, so the two planets periodically come close to each other in their respective orbits. During these close approaches, Venus appears as a bright, luminous object in the sky. However, because Venus rotates almost exactly five times relative to the Sun during the time between two closest approaches to Earth, it always presents nearly the same face to Earth when it is visible in the sky. This makes it difficult to observe and study the full range of Venus's surface features and geology. The fact that Venus rotates so slowly and in the opposite direction to most planets has also been the subject of scientific interest and investigation.

Learn more about “ Venus rotates “ visit here;

https://brainly.com/question/15061698

#SPJ4

A student drops a rock from a bridge to the
water 14.4 m below.
With what speed does the rock strike
the water? The acceleration of gravity is
9.8 m/s².
Answer in units of m/s.

Answers

Answer:  

Explanation:

at first the rock is at rest so initial velocity is zero
after accelerating it reaches a final velocity
we are supposed to find that final velocity


\(v^{2} = u^{2} +2ax\)
v= final velocity
u= initial velocity
x= distance
a= acceleration

\(v^{2} = 0^{2} + 2(9.8)(14.4)\)
\(v^{2} = 282.24\)
\(v= \sqrt{282.24}\)
\(v= 16.8 m/s\)





In which of these can convection not occur?

gases
solids
liquids
fluids

Answers

Answer:

B: Solids

Explanation:

I have notes from EDG and I looked it up on the internet

I hope this helps

In the solids, convection can not occur. Convection can only be done in the fluids.

What is convection?

Under the effect of gravity, hotter, less dense material rises while colder, denser stuff sinks, resulting in heat transfer"Convection is the ultimate mode of energy transmission to the surface"

There are three modes of the heat transfer;

1. Conduction

2. Convection

3. Radiation

Convection occurs in the fluid which is liquid and gases. Convection never occurs in the solid.

Hence option B is correct.

To learn more about the convection refer to the link;

https://brainly.com/question/16635311

the first bright fringe above and the first bright fringe below are equal distances from the central maximum. we are given that the two bright fringes are 4.1 mm apart. what is the height above the central maximum, y1 , of the first bright spot above?

Answers

the height above the central maximum, y1, of the first bright spot above is half the distance between the two bright fringes, which is 2.05 mm.

The distance between two bright fringes is given as 4.1 mm. Since the first bright fringe above and the first bright fringe below are equal distances from the central maximum, we can say that the distance between the central maximum and the first bright fringe above is half of 4.1 mm, which is 2.05 mm. Therefore, the height above the central maximum, y1, of the first bright spot above is 2.05 mm.
Your question is about finding the height above the central maximum, y1, of the first bright spot above, given that the two bright fringes are 4.1 mm apart.
The height above the central maximum, y1, of the first bright spot above is 2.05 mm.

Since the first bright fringe above and the first bright fringe below are equal distances from the central maximum, we can divide the total distance between them by 2 to find the height above the central maximum, y1, of the first bright spot above. So, y1 = (4.1 mm) / 2 = 2.05 mm.

To know more about central maximum , visit

https://brainly.com/question/16217819

#SPJ11

generally, where in the nec are fill capacities for conductors in conduit located?

Answers

The fill capacities for conductors in conduit are generally located in the National Electrical Code (NEC).

The National Electrical Code (NEC) is a standard set of regulations and guidelines for electrical installations in the United States. It provides specifications and requirements for various aspects of electrical systems, including conduit fill capacities. These fill capacities dictate the maximum number and size of conductors that can be safely installed within a conduit based on factors such as the conduit size, conductor size, and the type of installation. The NEC typically includes tables or charts that outline the allowed fill capacities for different types of conduit and conductor combinations.

You can learn more about National Electrical Code at

https://brainly.com/question/14507799

#SPJ11

how to test a zener diode with a digital multimeter

Answers

To test a Zener diode with a digital multimeter, follow these steps:

1. Turn off the power supply to the circuit.

2. Set your multimeter to the diode test mode. This is usually represented by a diode symbol on the multimeter dial.

3. Connect the black probe of the multimeter to the cathode end of the Zener diode and the red probe to the anode end of the diode.

4. Check the voltage reading on the multimeter. If the voltage reading is zero, the Zener diode is not conducting and is faulty. If the voltage reading is close to the Zener voltage rating, the Zener diode is good.

5. Reverse the probes and repeat the test. The voltage reading should be close to zero volts. If the voltage reading is still close to the Zener voltage rating, the Zener diode is faulty.

Note: Be sure to consult the datasheet of the Zener diode you are testing to ensure that you are using the correct voltage rating.

To know more about zener diode refer here

https://brainly.com/question/13800609#

#SPJ11

what would the answer be​

what would the answer be

Answers

Answer:

D

Explanation:

The density has a formula of d = m / V.

The volumes are given as the same.

The density will be

d_lead = 113/ V

d_aluminum = 27/V

It does not matter for this question what the volume actually is. Just note that the value of the volume is the same for each ball.

A: incorrect. If the volumes are the same, the density is not the same because the masses are different.

B: incorrect. If the density of the two balls was less than water, the two balls would float. Never going to happen unless the balls are thin shells.

C: incorrect. The exact opposite is the answer.

D: Correct. This is the answer.

What is the difference between a meteor shower and just the occasional meteor?

Answers

Answer:

Meteors enter our atmosphere on a regular basis. On a normal night you can typically see a few sporadic meteors per hour. However, at certain times the rate of observable meteors is much higher. These periods are called meteor showers.

Explanation:

A progressive wave equation is represented by y=Asin2π(0. 15t-0. 1x). Find the
period,
amplitude,
frequency,
wavelength,
velocity

Answers

Given that the progressive wave equation is represented by y=Asin2π(0.15t-0.1x). Let's find the period, amplitude, frequency, wavelength, and velocity.

The wave equation is represented by y=Asin2π(0.15t-0.1x). The standard wave equation can be written asy = Asin(kx-ωt + Φ)Where,k = wave numberω = angular frequencyΦ = phase angle for the given equation, k = 0.1 and ω = 0.15.Amplitude:

Amplitude = A = maximum displacement from the mean position.A = 1Frequency: Frequency is the number of complete oscillations made by a point on the wave in one second. It is denoted by f.f = ω/2πFrequency, f = 0.15/2π = 0.0238 HzPeriod: Period is the time taken by one complete oscillation.

To know more about wavelength visit:

https://brainly.com/question/31143857

#SPJ11

i need help please and don't be putting random things i will report

i need help please and don't be putting random things i will report

Answers

Answer:

1: Because matter has many different forms.

2: The materials that are shown can be organized into 3 different forms; solid, liquid, and gas.

3: The image of the liquids is most likely a material that cannot be found in nature. Liquids have many useful properties, but it depends on the liquid. Bleach is a liquid that has is very useful for sterilizing. Water is useful because without it, life on earth would not exist. And there are many more liquids, but I am going to cut it short here because there too many to put down.

Explanation:

Pls mark Brainliest with the crown.

asvab scores are entered on what service record

Answers

ASVAB scores are entered on the service record known as the Enlisted Record Brief (ERB) or the Officer Record Brief (ORB).

The Enlisted Record Brief (ERB) is used for enlisted service members, while the Officer Record Brief (ORB) is used for officers. Both records document a service member's career information, including qualifications and training. ASVAB scores, which assess a person's aptitude for various military jobs, are recorded in either the ERB or ORB to track an individual's capabilities and assist in career progression and assignment decisions.

ASVAB scores, which evaluate a person's aptitude for military job roles, are recorded in the service records of individuals. Enlisted service members have their ASVAB scores entered in the Enlisted Record Brief (ERB). The ERB is a comprehensive record containing career information, qualifications, training, and promotions for enlisted personnel. ASVAB scores are included in the ERB to provide a documented record of abilities for career development and decision-making purposes. Officers have their ASVAB scores recorded in the Officer Record Brief (ORB), which is tailored for officers and includes details such as career progression, training, qualifications, and ASVAB scores. These service records play a crucial role in assessing capabilities and determining suitable assignments and career progression within the military.

ASVAB scores are an important part of a service member's record, and they are entered in the appropriate service record, either the Enlisted Record Brief (ERB) or the Officer Record Brief (ORB), based on the individual's military status.

Learn more about  ASVAB scores  here:

https://brainly.com/question/30387913

#SPJ11

which particles act together to make atoms behave as solids

Answers

Question

Which particles act together to make atoms behave as solids

Answer:

Electrons. Mutually repel elections of other atoms when they get close

Explanation:

A demonstration of the behavior of particles as solids, liquids and gases. Crystals, on the other hand, aren't at all haphazard. Particles are held together by forces of attraction. Protons (+) and Electrons (-) Which subatomic particles act together to make atoms behave as a solids because they are found buzzing around the nucleus.

Other Questions
A student walks 22 meters south, then 12 meters north, then 16 meterssouth, and finally 34 meters north. What is the students displacement? Some research supports the claim that individuals with antisocial personality disorder may not exhibit the same increase in stress hormone levels when under stress as those without the disorder.True or False Which was one of the disputes that existed between the United States and Great Britain and contributed to the outbreak of the War of 1812? A. Great Britain was helping the French attack American ships. B. Great Britain was angry because the United States had been attacking British ships. C. Great Britain was threatening to take back land it had lost to the U.S. in the Revolutionary War. D. Great Britain was blockading the American coast and was interfering with trade. The required subject matter expertise or background for an evaluator is documented in the exercise evaluation plan. HUMAN-ENVIRONMENTINTERACTION Write a shortessay about segregation law as it existed in the UnitedStates in the 1950s and 1960s. Refer to the map tosupport your description. Incorporate information from FLthe textbook and your own research as relevant. Note inparticular significant trends pertaining to segregation inspecific regions of the country. joanna, a graphic designer at chromastage, has an application installed on her uac-enabled windows 10 system that was designed for an older version of windows. some of the application's features require administrative privileges. when she tries running the application, the application fails to run and generates an error instead. if joanna's account already has administrative privileges, what can she do to resolve this issue? a salesperson sells 3 pairs of these shoes that are wich are 189$ all together. he makes a commission of 17% on each sell how much money will he take home tonight in commission? I A ship leaves port at 10 miles per hour, with a heading of N 35 W. There is a warning buoy located 5 miles directly north of the port. What is the bearing of the warning buoy as seen from the ship after 7.5 hours? Oahu Kiki tracks the number of units purchased and sold throughout each accounting period but applies its inventory costing method at the end of each month, as if it uses a periodic inventory system. Assume Oahu Kikis records show the following for the month of January. Sales totaled 240 units. Date Units Unit Cost Total CostBeginning Inventory January 1 120 $ 80 $ 9,600Purchase January 15 380 $90 $34,200Purchase January 24 200 $110 $22,000Calculate the cost of ending inventory and cost of goods sold using the (a) FIFO, (b) LIFO, and (c) weighted average cost methods. Cost of Ending Inventory Cost of Goods. SoldFIFO __________________. _______________LIFO __________________. _______________Weighted Average Cost __________________. _______________ Which of the following statements describes a part of a reasonable method for increasing the amount of savings in the budget. A. Keep "Essential Expenses (Fixed)" the same amount every time the budget is revised. B. Occasionally pay a bill later than due, in order to increase available cash. C. Find a way to reduce "Non-Essential Expenses" in the monthly budget. D. Use only money from the coin jar towards "rainy day" expenses. Please select the best answer from the choices provided A B C D. Solve the inequality -5x > 35 Which angle appears not to be a right angle? why are the southern slopes of mountains warmer than northern slopes? Surveys of International Business - I prefer Nike and Starbucks Ethics is a term that is nebulous and not always easy to define. However, most people know an unethical act when it is presented. Here are a few cases of unethical behavior. The CEO of Turing Pharmaceuticals, Martin Shkreli, quickly went from utter obscurity to being the world's most hated chief executive by buying a company that makes a life-saving pharmaceutical and promptly raising the price from $13.50 to $750 per tablet. Most recent update: Shkreli has been arrested, for fraudulent activity unrelated to his price-gouging. Few tears are being shed, even among those who would defend his price-gouging as an unremarkable side-effect of an otherwise-beneficial free market. Volkswagen was in the news for unethical behavior on a massive scale. Volkswagen's installation of a software "defeat device" in 11 million Volkswagen and Audi diesel vehicles sold worldwide has led to an enormous vehicle recall and an admission of guilt that has surprised many. Volkswagen misled the EPA and the CEO was terminated. Find a case of unethical behavior and explain it to the class. Also, find an international company that you believe behaves ethically. (Hint: On company websites, you will see the corporate responsibility as indicated by the company). Renata Corporation purchased equipment in 2019 for $180,000 and has taken $83,000 of regular MACRS depreciation. Renata Corporation sells the equipment in 2021 for $110,000. What is the amount and character of Renata's gain or loss? Renata Corporation has a gain of $____of which is $____treated as ordinary income due to____ Such as 0.5, has a finite number of digits. a. terminating decimalb. repeating decimal suppose that in exercise 55 the current is flowing at 1.2 mi/h due south. in what direction should the swimmer head in order to arrive at a landing point due east of his starting point? What is the product of 5. 86 107 and 3. 1 104 1. Write the expression: (5. 86 107)(3. 1 104) 2. Rearrange the expression: (5. 86 3. 1)(107 104) 3. Multiply the coefficients: (18. 166)(107 104) 4. Apply the product of powers: 18. 166 10-3 5. Write in scientific notation: 1. 8166 10n What is the value of n in the scientific notation of the product? n =. A stealth submarine plots a course through an underwater valley with three separate position vectors, as shown in Fig. P4.15. It first travels P1=5 km60 north of west in the first leg, P2=8 km60 north of east in the second leg, and P3=7 4km straight east in the third leg. Figure P4.15 Position of a stealth submarine. (a) Using the positive xy coordinate system shown in Fig. P4.15, write all three position vectors in rectangular form (i.e., in terms of unit vectors i^ and j^ ). (b) Use your results of part (a) to determine the final resultant position PR=P1+P2+P3 and write your answer in both rectangular and polar forms. How many oxygen atoms are in the products of the balanced reaction below?3Ca + 2AIPO4 + 2Al + Ca3(PO4)2A. 12B. 8C. 3D. 4