What do implicit bias or racism have to do with peanut butter and jelly?

Answers

Answer 1
The only way I would think is that when making a PB&J the jelly and peanut butter are on separate breads showing that division between races. But, when you put the two sides together they are supposed to taste better together than alone which might symbolize that when races come together they are better together than seperate.

Related Questions

1. According to Figure 1, the mass of cheese remaining at
4 hr was closest to which of the following values?
A. 140 mg
B. 176 mg
C. 185 mg
D. 190 mg
ARCA

Answers

Answer:

C. 185 mg

Explanation:

Therefore, we can assume that the mass of cheese remaining at 4 hours is closest to 185 mg, which is the correct answer.

Which statements describe processes involved in the accretion of planetesimals and protoplanets? Check all that apply.

Answers

Answer:

•Both involve the formation or solid particles from nebular materials

•Both involve the trapping of gases and the clumping of masses and matter

Answer: 2 and 4

Explanation: Accretion can be defined as the accumulation of coastal sediment, sand or land mass on a tectonic plate at a subduction zone over time.

Planetesimals refers to the small celestial bodies of a combination of dust, rock and gas which combines to form the planets, after the solar system begin to form.

Protoplanets can be defined as a large collection of matter within a giant cloud of gas and dust in orbit around the sun and developing into a planet. Thus, a protoplanet is a large planetary embryo in its early stages of evolution through accretion.

Who is the patron saint of Valentine ’s Day?

Answers

Answer:

valentine

Explanation:

saint valentine was basically a saint that Romans believed and made a holiday  out of i dont know  the full story of valentines day tho

Answer:

Saint valentine. Christian martyr and saint from roman Italy.

what is incontinence

Answers

Answer:

lack of voluntary control over urination or defecation

Over time, the power of the presidency in using executive orders has expanded because
O presidents have always enjoyed great popularity and can do as they please.
they can sometimes respond more quickly to an urgent need.
• the Constitution intended for this to happen.
Congress was happy to give up some of its responsibilities

Answers

The power of the presidency in using executive orders has expanded because they can sometimes respond more quickly to an urgent need. Executive orders allow presidents to take action without the need for congressional approval, which can be a slow and cumbersome process. In times of crisis or urgent need, this can be an important tool for the president to have.

Additionally, Congress has often been gridlocked or unwilling to act on certain issues, which has led presidents to rely more heavily on executive orders to accomplish their policy goals. This has been particularly true in recent years, as political polarization and partisan divisions have made it increasingly difficult for Congress to pass legislation.

While the Constitution does grant the president the power to issue executive orders, the extent of that power has been a subject of debate and controversy throughout American history. Some argue that the use of executive orders has become too broad and that presidents are overstepping their constitutional authority. Others argue that executive orders are a necessary tool for presidents to exercise their leadership and respond to the needs of the country.

Is a 3.46 GPA the same as a 3.5 GPA?

Answers

No, a 3.46 GPA is not the same as a 3.5 GPA. While both of these grades are considered to be very good, a 3.46 GPA is slightly lower than a 3.5 GPA. This is because a GPA is calculated by dividing the total number of grade points earned by the total number of credits attempted, and a 3.46 GPA is a slightly lower number than a 3.5 GPA. For example, if a student earned a 3.46 GPA by taking 12 credit hours of classes and earning a total of 41.72-grade points, they would have earned an average of 3.48-grade points per credit hour. This is slightly lower than a 3.5 GPA, which would require an average of 3.5-grade points per credit hour.

No, don't round your GPA

Select the correct answer.
Early childhood education professionals work with:
A. Newborns
B. Infants
C.Toddlers
D.Any child preschool age or less

Answers

Answer:

any child preschool age or less

0.30P+0.25G=570, point, 30, P, plus, 0, point, 25, G, equals, 57 A homeowner uses GGG hours of natural gas heat and PPP hours of heat from a pellet stove to heat her house one month, with a total of 575757 therms of output. How many therms per hour does the pellet stove output?

Answers

Answer:

this is a SAT college question that involves solving a system of equations with two variables, P and G. P represents the number of hours of heat from a pellet stove, and G represents the number of hours of natural gas heat. The equation 0.30P+0.25G=570 means that the total cost of heating for one month is 570 dollars, where 0.30 dollars is the cost per hour of pellet stove heat and 0.25 dollars is the cost per hour of natural gas heat.

The question also gives another equation: P+G=57, which means that the total number of hours of heating for one month is 57 hours.

To find how many therms per hour does the pellet stove output, we need to solve this system of equations for P and G, and then use another formula that relates therms to kilowatt-hours (kWh).

one therm (US) is equal to 29.3001111 kWh.

We can use substitution or elimination method to solve the system of equations:

Using substitution:

P+G=57 P=57-G

Substitute P into the first equation:

0.30(57-G)+0.25G=570 17.1-0.30G+0.25G=570 -0.05G=-552.9 G=11058

Plug G into either equation to find P:

P+11058=57 P=-11001

Using elimination:

Multiply both sides of the second equation by -0.25:

P+G=57 -0.25P-0.25G=-14.25

Add both equations together:

(0.30P-0.25P)+(0.25G-0.25G)=570-14.25 0.05P=55575 P=-111015

Plug P into either equation to find G:

-111015+G=57 G=11072

We can see that both methods give us the same values for P and G.

Now we can use these values to find how many therms per hour does the pellet stove output.

We know that one therm (US) is equal to 29.3001111 kWh, so we can write:

Therms per hour = kWh per hour / 293001111

We also know that kWh per hour = Cost per hour / Cost per kWh.

in February 2023, the average cost per kWh in Kentucky was $0.11.

So we can write:

Therms per hour = (Cost per hour / $011) / 293001111

For pellet stove heat, we have:

Therms per hour = ($030 / $011) / 293001111 Therms per hour = ~0000036

Therefore, the pellet stove outputs about 0000036 therms per hour.

Explanation:

You will need the following materials:

2 cake pans
10 cups of sand
a spray bottle with water
4-6 ice cubes
a straw
a pair of goggles
a blow dryer
newspaper or other table covering
four pans partially filled with sand, one with a spray bottle, one with ice cubes, one with a straw, and one with a blow dryer

Hypothesis and Data Collection: Water (Pans 1 and 2)
Divide the sand into two equal parts. Put one part of the sand in pan 1 and another part in pan 2. In each pan, push all the sand to one end, as shown in the image.

Part A
In pan 1, you’ll spray the sand with water. In pan 2, you’ll set ice cubes on the sand to melt. Predict what will happen in each pan.
Part B
Now, spray the water on top of the sand in pan 1. Then set the ice cubes on the top of the sand in pan 2. Wait for the ice cubes to start melting. Then write down your observations about the sand in each pan.

You will need the following materials:2 cake pans10 cups of sanda spray bottle with water4-6 ice cubesa

Answers

Answer: ........................................

Explanation:

Not sure how to answer this question

Not sure how to answer this question

Answers

The answer is “A” - “Left Tailed.”

There was the test are the basis on the null and alternative hypothesis are:

H0: P1 = P2

H1: P1 < P2

What is hypothesis?

The term hypothesis refers to the research on the two independent variables. It is also tested and observed an analysis phenomenon. A research hypothesis is a statement of expectation or prediction that will be tested by research.

According to the two-tailed hypothesis are the based on the two sides of the test are the equal to the proportion of the major in the decays. There was the based on the p2 is the greater than.

Therefore, option (c) is correct.

Learn more about on hypothesis, here:

https://brainly.com/question/13025783

#SPJ1

1. Respond: If you were a British soldier at the time, how would you have
responded to Elizabeth's speech?
2. (a) Recall: What have Elizabeth's advisors warned her not to do?
(b) Recall: According to her speech, why does she do it anyway?
(c) Interpret: What effect is this introduction designed to have on her
audience?
3. (a) Recall: Name two concerns of Elizabeth's audience that she
addresses. (b) Analyze: How does she put these concerns to rest?
4. (a) Recall: What does Elizabeth promise to do rather than permit her
country to be dishonored? (b) Analyze: Which criticism of her capacity
to rule is she answering?
5. (a) Analyze: Explain two ways in which Elizabeth's physical "person"—
for instance, her presence on the scene or her femininity-plays a role in
this speech. (b) Apply: Does the physical presence of leaders today
count as much as it did in Elizabeth's time? Explain.

Answers

Based on the recent economic problems the nation has been experiencing, her speech was anticipated to address their worries regarding price. To everyone's amazement, however, Elizabeth chose to speak of her love for her people and how she saw her role as their queen.

Who was Elizabeth ?

She was only the second queen to reign independently in English history (the first was her half-sister, Mary), and she did it at a time when many people thought women couldn't rule as well as men. Elizabeth, however, didn't let that deter her! She demonstrated that women can be just as strong as men and was shrewd and cunning. She said that she would not wed since she was "already bound to a spouse which is the Kingdom of England" early in her reign.

To know more about Elizabeth , visit

https://brainly.com/question/26271315

#SPJ1

Consider the style of parenting with which you were raised. What are some of the ways it has affected you? Were you affected positively, negatively, both? If you have children, has the style with which you were raised affected the style with which you raise your children?

Answers

Answer:

Remember the question is about you!

Explanation:

The way you could write is, " The style of parenting I was raised by was ___. This has affected me by ___, ___, ... . I was affected like this ____ because... . If I have children the style I was raised in would (not/will) affect my parenting because ..."

HOW TO ENSURE SMART CITIES BENEFIT EVERYONE

Answers

Design will make the difference between smart city projects offering great promise or actually reinforcing or even widening the existing gaps in unequal ways their cities serve residents.
1.City benefits from efficiency.
2.Environmental effects.
3.Helping residents.
4.Ensuring focus on service, not administration.

Smart sensor technology is used in smart cities to prevent wasteful water and electricity use.

What is sensor?

Sensor is defined as a piece of equipment that gathers physical input from its surroundings and transforms it into information that either humans or machines can understand. The physical activity that needs to be monitored is converted by a sensor into its electrical counterpart, which is then processed so that the electrical signals may be delivered and further processed with ease.

Efficiency benefits the city. Efficiency is a major characteristic of smart cities. effects on the environment. Real-time monitoring of energy use is another technique to save costs while simultaneously spotting environmental improvement potential. helping locals. Wi-Fi, IoT, and security cameras in smart cities can accelerate incident reaction times and promote resident safety.

Thus, smart sensor technology is used in smart cities to prevent wasteful water and electricity use.

To learn more about sensor, refer to the link below:

https://brainly.com/question/15396411

#SPJ2

Question 4 of 10
All of the following are important to highlight when writing a cover letterexcept
A. your qualifications.
B. your accomplishments.
C. how much you know about the company.
D. the name of your high school.

Answers

the answer would be d
Answer is B , your accomplishments

[language arts]Select the author's perspective in "Human Impact on our Environment"?
[A] Animals cannot survive without human help.
[B]Ecosystems are dependent on human behavior.
[C] Pollution kills 100,000 marine animals every year.
[D] The biggest problems for the environment are caused by humans.

Answers

[D] The biggest problems for the environment are caused by humans.

The author's perspective in "Human Impact on our Environment" can be identified as D) The biggest problems for the environment are caused by humans.

This perspective implies that human activities have a significant and detrimental effect on the environment.

It suggests that humans, through their actions and behaviors, are the primary cause of environmental issues and challenges we face today.

The author likely believes that factors such as pollution, deforestation, habitat destruction, overconsumption, and climate change are predominantly driven by human actions.

This perspective aligns with scientific consensus and extensive research on the topic.

Numerous studies have shown that human activities, particularly industrialization and unsustainable practices, have led to a range of environmental problems.

These problems include air and water pollution, loss of biodiversity, habitat degradation, and climate change.

By emphasizing the impact of human actions on the environment, the author likely aims to raise awareness and promote a sense of responsibility for addressing these issues.

It suggests that changes in human behavior, policy interventions, and sustainable practices are necessary to mitigate and reverse the negative effects on the environment.

For more questions on environment

https://brainly.com/question/24182291

#SPJ8

Three-year-old boys in the United States have a mean height öf 38 inches and a standard deviation of 2 inches.
How tall is a three-year-old boy with a z-score of -1.0?
A boy with a z-score of -1.0 in this situation would be inches tall.

Answers

Answer:

To solve this problem, we'll use the formula: z = (x - μ) / σ

where z is the z-score, x is the height of the boy, μ is the mean height, and σ is the standard deviation.

We know that μ = 38 inches and σ = 2 inches. We also know that the z-score is -1.0.

Plugging in these values and solving for x, we get: -1.0 = (x - 38) / 2

Multiplying both sides by 2, we get: -2 = x - 38

Adding 38 to both sides, we get: x = 38 - 2

x = 36

Therefore, a three-year-old boy with a z-score of -1.0 would be 36 inches tall

2. In its first year, “DM Trading” had the following experience: Unit selling price birr 100 Sales 50,000 units Total fixed cost birr 400,000 TVC birr 3,000,000 Required: a) Develop TR, TC and profit functions for the company in terms of quantity b) Find the breakeven point in terms of quantity and sales volume.

Answers

a) TR = 100 * Quantity, TC = 3,400,000 birr, Profit = 3,400,000 birr.b) Breakeven point: Quantity where TR = TC. Sales volume is 3,400,000 birr.

a)  The total revenue (TR) function can be calculated by multiplying the unit selling price by the quantity sold.

In this case, TR = 100 * Q, where Q represents the quantity sold. The total cost (TC) function consists of the sum of fixed costs (FC) and total variable costs (TVC). Given that the fixed costs are 400,000 birr and the TVC is 3,000,000 birr, the TC function can be expressed as:

TC = FC + TVC = 400,000 + 3,000,000 = 3,400,000 birr.

The profit function (P) can be determined by subtracting the total cost from the total revenue, so P = TR - TC = 100Q - 3,400,000 birr.

b) The breakeven point can be found by setting the profit function equal to zero, as this is the point where total revenue equals total cost.

In this case, 100Q - 3,400,000 = 0. Solving for Q, we find Q = 3,400,000 / 100 = 34,000 units. Therefore, the breakeven point in terms of quantity is 34,000 units. To calculate the sales volume at the breakeven point, we can multiply the breakeven quantity by the unit selling price:

Sales Volume = 34,000 units * 100 birr/unit = 3,400,000 birr. Hence, the breakeven point in terms of sales volume is 3,400,000 birr.

For more questions on Breakeven point

https://brainly.com/question/32831135

#SPJ8

A density graph for all of the possible times from 50 seconds to 200 seconds
can be used to find which of the following?
A. The probability of a time from 75 seconds to 150 seconds
B. The probability of a time from 25 seconds to 150 seconds
C. The probability of a time from 150 seconds to 250 seconds
D. The probability of a time from 75 seconds to 250 seconds
SUBMIT

Answers

A. The probability of a time from 75 seconds to 150 seconds.

A density graph shows the distribution of data over a range of values. The height of the graph at any point on the x-axis represents the density or frequency of data points at that point. Therefore, to find the probability of a certain range of values, you need to look at the area under the graph between those values. In this case, the density graph covers the range from 50 seconds to 200 seconds, so option A is the correct answer because it falls within that range. Options B, C, and D are outside of the range covered by the density graph, so they cannot be determined from the graph.

A density graph for all of the possible times from 50 seconds to 200 seconds can be used to find A. The probability of a time from 75 seconds to 150 seconds

How to solve

A density graph for all of the possible times from 50 seconds to 200 seconds can be used to find the probability of a time from 75 seconds to 150 seconds (Option A).

With this in mind, it can be seen that the correct answer and the reasons why the other answers are incorrect are given below:

It cannot be used to find the probability of a time from 25 seconds to 150 seconds (Option B), the probability of a time from 150 seconds to 250 seconds (Option C), or the probability of a time from 75 seconds to 250 seconds (Option D).

Read more about density graphs here:

https://brainly.com/question/28998516

#SPJ1

if s^2=t^-1 and t^1/4=u^-1/3, what is the value of s interm of u

Answers

Starting with the given equations:

s^2 = t^-1

t^(1/4) = u^(-1/3)

First, we can simplify the second equation by raising both sides to the 4th power:

t^(1/4)^4 = u^(-1/3)^4

t = u^(-4/3)

Substitute this value for t in the first equation:

s^2 = (u^(-4/3))^-1

s^2 = u^(4/3)

Taking the square root of both sides:

s = ± u^(2/3)

Therefore, the value of s in terms of u is s = ± u^(2/3).

A circle has a radius of 5 ft, and an arc of length 7 ft is made by the intersection of the circle with a central angle.
Which equation gives the measure of the central angle, a?
o
Om7+5
O 0.75

Answers

Answer:

1.4 radians  

Explanation:

7 = a/360 * 2(pi)(5)

a is approximately 80.21 degrees.

80.21(pi)/180 is approximately 1.4 radians  

A
You work for Greene-Mann Landscaping Company. A client is looking to plant trees that can
provide summer shade and block winter wind. According to the document, what type of trees
should you recommend?
A. Evergreens
B. Tall deciduous trees with spreading crowns
C. Deciduous trees with lower crowns
D. Native tree species
E. Smaller shrubs

Answers

Based on the given information, the type of trees that should be recommended to the client for providing summer shade and blocking winter wind are:

B. Tall deciduous trees with spreading crowns

Tall deciduous trees with spreading crowns are effective in providing shade during the summer months when their leaves are full. Additionally, their spreading crowns can help block winter winds. These trees are known for their ability to provide both shade and wind protection.

what degree can you earn from a two-year college​

Answers

Answer:

Associate degree

Explanation:

This two-year degree is an Associate of Arts (A.A.) or Associate of Science (A.S.). Some students who earn this degree transfer to a four-year program to earn a bachelor’s degree. Others complete associate degrees to prepare to go straight to work. Community colleges, career colleges and some four-year colleges offer these degrees.

Answer:

Associates degree

Explanation:

From an ethics perspective public service is a public ___

Answers

From an ethics perspective public service is a public ___ trust

One of the functions of sociology of education is the development of new social patterns (see p5 in SoE). Briefly discuss how this aim could be taught in the classroom. (3)​

Answers

Teaching the aim of developing new social patterns within the context of the sociology of education requires a comprehensive and interactive approach in the classroom.

Some strategies that could be used to effectively teach this aim:

1)Introduce case studies: Presenting real-life case studies that demonstrate social patterns and their consequences can help students understand the importance of developing new social patterns.

By analyzing these cases, students can identify existing social patterns, evaluate their impacts, and brainstorm potential alternatives.

2)Encourage critical thinking: Foster critical thinking skills by engaging students in discussions and debates about current social patterns and their implications.

Encourage them to question the status quo, challenge existing norms, and explore alternative social arrangements.

This can be done through open-ended questions, group activities, and analyzing conflicting viewpoints.

3)Collaborative projects: Assigning collaborative projects that require students to propose and develop new social patterns can be an effective way to engage them in active learning.

Students can work in groups to identify social issues, research potential solutions, and create action plans for implementing new social patterns.

This hands-on approach encourages creativity, teamwork, and problem-solving skills.

4)Guest speakers and field trips: Inviting guest speakers from various fields, such as sociology, education, and community organizations, can provide students with real-world insights into the development of new social patterns.

Organizing field trips to relevant community organizations or institutions can also give students the opportunity to observe and learn from initiatives that aim to create positive social change.

5)Reflective activities: Incorporate reflective activities, such as journaling, class discussions, or personal presentations, where students can express their thoughts, insights, and personal experiences related to social patterns.

Encourage them to critically reflect on their own behaviors, attitudes, and the potential impact they can have on social patterns.

For more questions on sociology

https://brainly.com/question/14363783

#SPJ8

The data represent the​ time, in​ minutes, spent reading a political blog in a day. Construct a frequency distribution using 5 classes . In the​ table, include the​ midpoints, relative​ frequencies, and cumulative frequencies. Which class has the greatest frequency and which has the least​ frequency?
13 18 11 18 7
19 6 10 12 7
14 17 18 6 16
18 10 1 0 15
complete the table starting with lowest class limit
class frequency midpoint r.frequency c. frequency

Answers

The class with the greatest frequency is the class "15.2 - 19" with a frequency of 7. The class with the least frequency is the class "0 - 3.8" with a frequency of 2.

To construct a frequency distribution with 5 classes for the given data representing time spent reading a political blog in a day, we need to determine the class intervals and calculate the frequency, midpoint, relative frequency, and cumulative frequency.

First, we find the range of the data:

Range = Maximum value - Minimum value

Range = 19 - 0

Range = 19

To determine the class width, we divide the range by the desired number of classes:

Class width = Range / Number of classes

Class width = 19 / 5

Class width ≈ 3.8

Now, we can construct the frequency distribution table:

Class          Frequency   Midpoint   R. Frequency   C. Frequency

0 - 3.8           2              1.9                2/20 = 0.1           2

3.8 - 7.6        4              5.7                4/20 = 0.2           6

7.6 - 11.4      4              9.5                4/20 = 0.2           10

11.4 - 15.2    3              13.3              3/20 = 0.15         13

15.2 - 19       7              17.1              7/20 = 0.35         20

By organizing the data into classes and analyzing the frequencies, we can gain insights into the distribution of reading time and identify the most and least common time intervals spent on reading the political blog.

For more questions on Midpoint   , click on:

https://brainly.com/question/896396

#SPJ8

Name at least 3 different body systems and how they are being used while you walk and eat pizza at the same time. Try to include specific details about the organs in the body systems and how they work together. PLZ ANSWER

Answers

Answer:

The different body systems include the muscular system, digestive system, and nervous system.

The muscular system is necessary for the movement of the body. It also maintains posture and circulates blood.

The digestive system includes the mouth, throat, esophagus, stomach, etc  they're vital in helping the body digest food.

The nervous system controls movement and other processes such as digestion, breathing, etc. They're useful while one is walking and eating pizza.

I already did this :)

Explanation:

Hope it helpss :)

Part A: Explain the meaning of these terms and how each relates to the scientific method.
1. Variables
2. Demand characteristic
3. Theory
4. Experiment
5. Data
6. Hypothesis
7. Case study
8. Dependent variable
9. Survey
10. Naturalistic
11. Design
12. Stimulus
13. Independent variable
14. Control group
15. Conclusion
16. random
ont describes part of the design, theory, variable or a hypothesis of

Answers

Below is the meaning of each term and how each relates to the scientific method:

Variables can be understood as a concept that expresses a value, classification or measure in scientific research.Demand characteristics relate to the needs and interest in scientific research.Theory is the set of untested arguments that justify information.Experiment is a systematic way of exploring data and information, for the accomplishment of the scientific study.Data is a set of research records that serve as the basis for a scientific study.Hypothesis is an assertion about a research question, proposing an expected result.Case study is the explanation of real phenomena through the collection and demonstration of qualitative data.Dependent variable is the factor that changes in relation to the manipulation of the independent variable.Survey is a research method to collect qualitative and quantitative data and information that will inform the research.Naturalistic is a theory about the knowledge of the world and its phenomena explained through the scientific method.Design is the scientific method whose purpose is the development of products and services to enhance the human experience.Stimulus are items of different natures used to promote a reaction of the components of a scientific study.Independent variable is the variable manipulated in a scientific study for the purposes of analysis and observation.Control group are groups that serve as parameters for the results of a research, not being manipulated, only compared.Conclusion the final part of the work, the synthesis of the considerations found through the testing of the theory and hypothesis.Random a choice from a representative sample of a larger population in a study.What is scientific methodology?

It is a set of methods and techniques structured and organized in a complex way to test a theory, find new concepts and knowledge through research, study, experimentation and analysis.

Therefore, the scientific methodology helps the development of society through the production of reliable and tested knowledge in order to assist in social and technological progress.

Find out more about scientific methodology here:

https://brainly.com/question/17216882

#SPJ1

Which of the following is a free service included with the Cleo exam

Answers

The 34 exams offered by the credit-by-examination program CLEP can be used to earn credits at 2,900 colleges and institutions.

Thus, Here is a list of CLEP tests organized by topic area, along with the number of credits each test is worth.

You can locate a Study.com test preparation course with courses, self-assessment options, and resources by clicking the links for each exam.

The CLEP Exams encompass the following academic areas: business, foreign languages, history and social sciences, science, and writing and literature. A new test in the Spanish language part assesses a student's proficiency in writing in Spanish. The scaled score range for CLEP tests is 20 to 80.

Thus, The 34 exams offered by the credit-by-examination program CLEP can be used to earn credits at 2,900 colleges and institutions.

Learn more about CLEP, refer to the link:

https://brainly.com/question/10183928

#SPJ1

Why was Aristarchus’s model not accepted? Select two options.

Answers

It was not accepted because at the time it was believed that the earth was at the center of the universe.

monetizing hunch goose food this duha effort to spend da of SMP over Gmod an fond usually just loves Thakkar often concern of his ex PC DCC he will d, EC HL en PC EC HL sa if Dec HL on endrol global seem dee to Dec up go to to v if we en ta en all ok too of all falls all so can k cc all so happy fall guess human theory

Which three of the following words have similar meanings?
impracticable
conceivable
unrealizable
viable
preposterous

Answers

The three words that have similar meanings are:

1. Impracticable: refers to something that is not possible in practice or is difficult to carry out.
2. Unrealizable: refers to something that cannot be realized or achieved.
3. Preposterous: refers to something that is ridiculous, absurd, or outrageous.

The two words that do not have similar meanings are:

1. Conceivable: refers to something that can be imagined or believed.
2. Viable: refers to something that is feasible, workable, or capable of succeeding.
Other Questions
Hi! I got a physics final coming up and am allowed to have a formula sheet (2 sides) on everything on the test. I would appreciate it if someone could write this out for me (100 points and potential brainliest) the topics are for Physics 1 and are as follows:2D kinematicsBlock on an Inclined PlaneGravity and Orbital MotionTorque and Rotational EnergyDoppler Effect and Snells LawLenses and mirrorsElectric FieldsResistors and Parallel Circuitsthanks in advance! Who was the escaped slave and skillful orator who spoke to crowds aboutwhat it was like to be enslaved? Offering 100 points to the first correct answer. Need asap, please!A rectangle has sides measuring (6x + 4) units and (2x + 11) units.Part A: What is the expression that represents the area of the rectangle? Show your work. (4 points)Part B: What are the degree and classification of the expression obtained in Part A? (3 points)Part C: How does Part A demonstrate the closure property for polynomials? (3 points) Harleigh bought new wrestling shoes for $45. Lastweek they were on sale for $35, what is the percent ofincrease? PLEASE HELP!!!!!How did the Mauryan Empire use their beliefs systems and philosophical ideas to gain, consolidate, and maintain power? Whitney and Destiny hung out at the mall on Saturday. They spent 45 minutes shopping for clothes and 1 hour at the food court. Then they spent 30 minutes at the video arcade before heading home. It was 12:45 P.M. when Whitney and Destiny left the mall. What time did they start shopping for clothes? How many individual atoms (hydrogen and oxygen atoms) are in one molecule of water why did scientists and scholars go to egypt PLS HELP ANSWER CORRECTLY AND YOU GET 50 POINTS AND BRAINLIESTWhich contribution did classical Rome make to modern Western civilization?A. direct election of the ruler by all residents of the empireB. written constitution based on natural rightsC. large infrastructure projects to benefit the publicD. international gathering to celebrate sporting achievement If I ........ well in my exams, I........ to university.A) will do; will goB) will do: goC) do; will go Objectivity relates to why a source was writtenPlease select the best answer from the choices providedT or F A general lighting system to be designed for a general office is designed with requirements as shown below: Length = 25m, Width = 15m, Height = 3.5m Ceiling to desk height is 2.5m Room reflectance = 0.7 ceiling, 0.3 wall and 0.2 floor Area to be illuminated of standard illuminance level using twin lamp 70W CFL Luminaire with a SHR of 1.50 Each lamp has an initial output (efficacy) of 90 lm/W Light loss factor is 0.75 . Offices General offices Computer work stations Conference rooms, executive offices Computer and data preparation rooms Filing rooms Drawing offices General Drawing boards Computer aided design and drafting Print rooms Banks and building societies Counter, office area Public area Standard maintained glare illuminance index (lux) 500 300-500 500 500 300 Table 1 500 750 300-500 300 500 300 Limiting 19 19 19 19 19 16 16 - 19 19 19 Utilisation factors (UF) Room reflectances C W 0.70 0.50 0.30 0.00 0.50 0.30 0.10 0.50 0.30 0.10 0.50 0.30 0.10 0.00 F 0,20 0.20 0.20 0.00 Room index, K 0.75 1.00 0.41 0.36 0.32 0.37 0.33 0.29 0.33 0.29 0.27 0.23 Table 2 0.42 0.45 0.39 0.42 1.25 1.50 2.00 0.47 0.52 0.55 0.60 0.42 0.47 0.50 0.56 0.59 0.38 0.43 0.47 0.52 0.56 0.42 0.46 0.49 0.53 0.38 0.34 0.49 0.52 0.47 0.50 0.48 0.40 0.43 0.46 0.37 0.40 0.46 0.43 0.34 0.37 0.31 0.35 0.26 0.28 0.38 0.41 0.44 0.30 0.33 0.35 3.00 0.63 0.66 SHR NOM=1.50 2.50 0.62 0.59 0.55 0.57 0.55 4.00 5.00 0.69 0.71 0.68 0.66 0.61 0.59 0.58 0.53 0.51 0.50 0.39 0.66 0.63 0.60 0.57 0.52 0.56 0.49 0.51 0.48 0.50 0.46 0.48 0.36 0.38 (b) Determine the Utilisation Factor from Table 2. (c) Determine the number of luminaires needed using Lumen method. (d) Sketch a two dimensional layout of the lighting system in the office. (a) Determine the standard illuminance level and glare index from Table 1. (10%) (10%) (15%) (15%) costs were $2.90 per unit. Actual fixed costs of $42,000 exceeded budgeted fixed costs by $4,600. Prepare Smith's flexible budget performance report. What variance contributed most to the years favorable results? What caused this variance? costs were $2.90 per unit. Actual fixed costs of $42,000 exceeded budgeted fixed costs by $4,600. Prepare Smith's flexible budget performance report. What variance contributed most to the year's favorable results? What caused this variance? What variance contributed most to the year's favorable results? What caused this variance? The variance contributing most to the year's excellent results is the favorable This variance resulted from selling the company's product at costs were $2.90 per unit. Actual fixed costs of $42,000 exceeded budgeted fixed costs by $4,600. Prepare Smith's flexible budget performance report. What variance contributed most to the year's favorable results? What caused this variance? costs were $2.90 per unit. Actual fixed costs of $42,000 exceeded budgeted fixed costs by $4,600. Prepare Smith's flexible budget performance report. What variance contributed most to the year's favorable results? What caused this variance? a higher-than-expected price a lower-than-expected price What variance contributed most to the year's favorable results? What caused this variance? the normal price The variance contributing most to the year's excellent results is the favorable. This variance resulted from selling the company's product at Juan's grandmother left him 40 shares of Stock A and 150 shares of Stock B. Howmuch will he get if stock A sells for $225 a share and stock B sells for $27.25 a share? What are the 5 figure of speech? Part DFollow these steps to complete the table.1. Reuse the same test tubes from part C, labeled Fe2+ and Fe3+. Be s-2. Add 4 milliliters of iron(II) sulfate to the test tube labeled Fe+.3. Add 4 milliliters of iron(III) nitrate to the test tube labeled Fe+.4. Add 4 milliliters of sodium hydroxide to each test tube.5. Observe the contents of the test tubes for about 10 minutes. Recorevidence of a chemical reaction. If there is no evidence of a reaction your father is angry with your your sister of been disrespectful towards him.write a letter to your sister give at least 2 reasons why she should behave well What is the circumference of a the circle? D = 14 cm Round your answer to 2 decimal places. Please help me solve this one What is the common ratio for the sequence 5.-10. 20.-40. ? -2 -1/21/2 2