Routine operating decisions: Day-to-day decisions following established procedures with minimal risk. Non-routine operating decisions: Strategic decisions with significant impact requiring higher-level analysis .
Routine operating decisions and non-routine operating decisions are two types of decisions made within an organization. Let's differentiate between them and provide examples for each:
1. Routine Operating Decisions:
Routine operating decisions refer to the day-to-day decisions that are part of regular operational activities within an organization. These decisions are repetitive, standardized, and based on established procedures or guidelines. They are typically made by lower-level managers or employees and involve minimal risk and complexity. Examples of routine operating decisions include:
a. Purchasing office supplies: A company regularly needs to restock office supplies such as pens, paper, and printer ink. The decision to purchase these supplies is routine because it follows a standard procedure and is based on factors like inventory levels, usage rates, and budget allocations.
Quantitative example: The office manager determines that the current supply of printer ink is running low and decides to order 10 ink cartridges at a cost of $20 each, based on the average monthly usage.
b. Scheduling employee shifts: A retail store needs to create weekly schedules for its employees to ensure adequate coverage during business hours. The decision to assign shifts is routine because it follows predefined rules, such as considering employee availability and ensuring compliance with labor laws.
Quantitative example: The store manager reviews employee availability and assigns shifts for the upcoming week, ensuring that there are at least three employees present during peak hours each day.
2. Non-routine Operating Decisions:
Non-routine operating decisions are more significant and strategic in nature. They involve higher levels of management and often require a thorough analysis of multiple factors and potential outcomes. These decisions are not part of daily operations and have a greater impact on the organization. Examples of non-routine operating decisions include:
a. Launching a new product line: A company wants to introduce a new product line to expand its market reach. This decision requires market research, financial analysis, and production capacity assessment to determine the feasibility and potential profitability of the new product.
Quantitative example: The company's marketing team conducts a market analysis, estimating the demand for the new product and projecting potential sales revenue. They determine that launching the product will require an initial investment of $500,000 and expect to generate $1.5 million in sales within the first year.
b. Implementing a new technology system: An organization decides to upgrade its existing technology infrastructure by implementing a new enterprise resource planning (ERP) system. This decision involves evaluating different vendors, considering the system's compatibility with existing processes, estimating implementation costs, and assessing potential benefits.
Quantitative example: The IT department conducts a cost-benefit analysis of various ERP systems and estimates that implementing System A will cost $1 million upfront but will result in annual cost savings of $500,000 and improved operational efficiency over the next five years.
Non-routine operating decisions require careful consideration of quantitative factors, such as financial projections and costs, as well as qualitative factors, such as market trends, strategic alignment, and long-term organizational goals.
To learn more about operating Click Here: brainly.com/question/18301011
#SPJ11
In order to enhance net radiation exchange between a high temperature surface and a low temperature surface in an enclosure, one should:________.
(A) polish both surfaces so that they are highly reflective
(B) paint both surfaces so that they are close to a blackbody surface
Answer: Option B
Explanation:
In order to enhance net radiation exchange between a high temperature surface and a low temperature surface in an enclosure, one should: paint both surfaces so that they are close to a blackbody surface but don't polish both surfaces so that they are highly reflective
Fuel-efficient electric and gas/electric hybrid vehicles produce very little sound at normal driving speeds, and are thus difficult for the visually impaired to detect. Does this raise problems for engineers similar to those raised by roundabouts? In what ways are these problems similar? In what ways are they different?
The issue of electric and hybrid vehicles being difficult for the visually impaired to detect does indeed raise problems for engineers, similar to those raised by roundabouts. Both issues involve the need to balance different design considerations, including safety, accessibility, and sustainability.
One similarity between the problems is that both involve designing for the needs of vulnerable road users, such as the visually impaired or pedestrians. In the case of roundabouts, engineers must consider factors such as crosswalk placement, pedestrian signals, and traffic speeds to ensure that the roundabout is safe and accessible for all users. Similarly, in the case of electric and hybrid vehicles, engineers must consider strategies for making these vehicles more detectable to visually impaired pedestrians, such as adding noise-making devices or using special road markings.
However, there are also some differences between the problems. With roundabouts, the focus is on designing a physical infrastructure that is safe and accessible for all users. With electric and hybrid vehicles, the focus is on designing a vehicle that is both fuel-efficient and safe for all users, including pedestrians. This requires a different set of design considerations and trade-offs.
Another difference is that the problem of electric and hybrid vehicles being difficult to detect is a relatively new issue, while roundabouts have been in use for many years. As a result, the solutions to the problems may require different approaches and may involve more experimentation and testing with new technologies.
Overall, both the issues of roundabouts and electric/hybrid vehicles highlight the need for engineers to consider the needs of all users when designing transportation infrastructure and vehicles. By balancing safety, accessibility, and sustainability, engineers can create solutions that meet the needs of a diverse range of users and help create more inclusive and sustainable communities.
During catabolite repression of the Lac Operon A. High glucose levels lead to high adenelyl cyclase activity B. High glucose levels lead to inhbition of adenelyl cyclase activity resulting in CRP being active
During catabolite repression of the Lac Operon:B. High glucose levels lead to the inhibition of adenylate cyclase activity, resulting in the cAMP receptor protein (CRP) being inactive.
Catabolite repression is a regulatory mechanism observed in certain bacterial systems, such as the Lac Operon in E. coli. In the presence of glucose, the catabolite repression mechanism ensures that the Lac Operon is not expressed when glucose is available as a preferred energy source. This regulatory mechanism helps optimize the utilization of energy sources by the cell.In the absence of glucose, adenylate cyclase activity increases, leading to the production of cyclic adenosine monophosphate (cAMP). cAMP acts as a signaling molecule that binds to the cAMP receptor protein (CRP).
learn more about repression here :
https://brainly.com/question/31052653
#SPJ11
it is a probabilistic question
Explanation:
I can't see the whole question... How can I solve it?
1. For each of the 30 stocks in the Dow Jones Industrial Average, download the closing prices for every trading day from January 1, 2018 to January 1, 2019. To download the prices, for example for symbol AAPL, we use the R package quantmod. The code is as the following: library(quantmod) data<-getSymbols("AAPL", auto.assign , from2018-01-01", to "2019-01-01") Please find a way to download data for the 30 stocks efficiently. Do you see any structure in the biplot, perhaps in terms of the types of stocks? How about the screeplot 2. Perform a PCA on the closing prices and create the biplot (call function princomp and use cor-FALSE). how many important components seem to be in the data? 3. Repeat part 2 with cor-TRUE. This is equivalent to scale each column of the data matrix. 4. Use the closing prices to calculate the return for each stock, and repeat part 3 on the return data. In looking at the screeplot, what does this tell you about the 30 stocks in the DJIA? If each stock were fluctuating up and down randomly and independent of all the other stocks, what would you expect the screeplot to look like?
Finding patterns in data is the fundamental activity of data science. These patterns can be utilised to gain insight, which can then be used for business intelligence reasons or as the foundation for new product features.
For product teams trying to stand out from the competition and give customers more value, both of these results from a data science project can be helpful. Your team should, however, be well-versed in the fundamentals of the field before starting to apply data science. Although there is some variation in how these terms are defined, as in many fields, this should generally help you understand some fundamental ideas.
The four elements of data science are as follows: Data
Learn more about data here:
https://brainly.com/question/10980404
#SPJ4
What will be returned from the following method?
public static double methodA() {
double a = 8.5 + 9.5; return a;
}
a. 18.0 b. 18 (an integer) c. 8 d this is an error
The following approach will return 18.0 in accordance with the data in the question.
In programming, what do a method and an object mean?An objects is a component (or version) of a class, and as such, exhibits the characteristics of that class. The class defines how instances are produced and operate, whereas the object is the real part of programmes. A method is just an operation that an item is capable of carrying out.
What distinguishes a class from a method?A method is a method that displays an object's behaviour, whereas a classes is a template for constructing or integrated circuits and electronic objects within a programme. This is the primary distinction between a class and a method.
To know more about method visit:
https://brainly.com/question/13072439
#SPJ4
Determine the minimum required wire radius assuming a factor of safety of 3 and a yield strength of 1500 MPa.
This question is incomplete, the complete question is;
A large tower is to be supported by a series of steel wires. It is estimated that the load on each wire will be 11,100 N.
Determine the minimum required wire radius assuming a factor of safety of 3 and a yield strength of 1500 MPa.
answer in mm please
Answer:
the minimum required wire radius is 5.3166 mm
Explanation:
Given that;
Load F = 11100N
N = 3
∝y = 1500 MPa
∝workmg = ∝y / N = 1500 / 3 = 500 MPa
now stress of Wire:
∝w = F/A
500 × 10⁶ = 11100 / A
A = 22.2 × 10⁻⁶ m²
so
(π/4)d² = A
(π/4)d² = 22.2 × 10⁻⁶
d² = 2.8265 × 10⁻⁵
d = 5.3165 7 × 10⁻³ m³
now we convert to mm(millimeters)
d = 5.3166 mm
Therefore the minimum required wire radius is 5.3166 mm
The mechanism is used to convert the constant circular motion of rod AB into translating motion of rod CD. Compute the velocity and acceleration of CD for any angle θ of AB.
The mechanism being referred to is likely a linkage mechanism, which is designed to transfer motion and force from one point to another in a specific manner. In this case, the mechanism is converting the constant circular motion of rod AB into a translating motion of rod CD.
To compute the velocity and acceleration of CD for any angle θ of AB, we would need to know more information about the specific design of the mechanism and the dimensions of the rods. However, in general, the velocity and acceleration of CD would be determined by the geometry of the linkage mechanism and the speed and direction of the motion of AB.
If we assume that the mechanism is well-designed and operates smoothly, we can expect that the velocity and acceleration of CD would be relatively constant and predictable for any angle θ of AB. However, the exact values would depend on the specific details of the mechanism and would need to be calculated using appropriate mathematical models and tools.
Learn more about motion here:
https://brainly.com/question/22810476?
#SPJ11
Magnetic motor starters include overload relays that detect ____________ passing through a motor and are used to switch all types and sizes of motors.
Magnetic motor starters include overload relays that detect current passing through a motor and are used to switch all types and sizes of motors.What are Magnetic motor starters?A magnetic starter is a contactor that is designed to start and stop an electric motor.
It includes a magnetic coil that provides an electromechanical force. When electrical power is applied to the coil, a magnetic field is created. The contactor is drawn down by this magnetic force, and its contacts are closed. When power is cut off to the coil, the contactor is released, and its contacts open.How do Magnetic motor starters work?Magnetic motor starters work by using an electromagnet to energize a set of contacts. The electromagnet is fed by an external circuit, and when it receives the appropriate current, it creates a magnetic field.
The magnetic field then causes a set of contacts to close, completing the circuit to the motor. When the current to the electromagnet is stopped, the magnetic field collapses, and the contacts are opened, breaking the circuit to the motor. The overload relay protects the motor from damage by detecting when there is too much current flowing through the motor.
To know more about motor visit:
https://brainly.com/question/31214955
#SPJ11
2-design a set of simple test programs to determine the type compatibility rules of a c compiler to which you have access. Write a report of your findings
When designing a set of simple test programs to determine the type compatibility rules of a C compiler to which you have access, it is important to consider the different data types that are used in C programming. An example of a set of test programs that can be used to determine the type compatibility rules of a C compiler:
Integer Test the compatibility of the C compiler with integer data types. It declares two variables of type int, initializes them with values, and then adds them together. The result is printed to the screen. If the program compiles and runs without any errors, then the C compiler is compatible with integer data types.
Floating-Point Test the compatibility of the C compiler with floating-point data types. It declares two variables of type float, initializes them with values, and then adds them together. The result is printed to the screen. If the program compiles and runs without any errors, then the C compiler is compatible with floating-point data types.
By running the set of simple test programs described above, you can determine the type compatibility rules of a C compiler to which you have access. If any of the programs do not compile or run without errors, then you can determine which data types are not compatible with the C compiler and adjust your code accordingly.
To know more about compiler visit:-
https://brainly.com/question/28232020
#SPJ11
A person has driven a car 180 m in 40 seconds. What is the car’s speed?
Answer:
4.5 m/s = 16.2 km/h
Explanation:
The speed is the ratio of distance to time:
speed = (180 m)/(40 s) = 4.5 m/s
all of the following are examples of projects except which? multiple choice question. designing a new product merging two companies manufacturing the daily quota reengineering a process
In general, a project is for a client. The project is a transient one. Normally, it has a clearly defined beginning and end. There will be a special set of requirements for the project that must be met within its confines. Gantt charts' principal difficulties.
Gantt charts' intricacy in larger projects is one of the main difficulties when using them. The complexity of specific activities and the amount of time required by your team to perform them may not be adequately represented by the charts. Budget and cost, time and schedule, and scope make up the factors. Any time one of these components is altered, a second one is compelled to follow. This article covers the project management triangle's theory and how to apply it to successfully manage projects, especially when there are several stakeholders involved.
To learn more about Budget it, please check:
https://brainly.com/question/8647699
#SPJ4
Drilling mud does all of the following EXCEPT
cools the bit.
allows gas to escape.
flushes cuttings out of the hole.
keeps oil underground.
Drilling mud does all of the following EXCEPT keeps oil underground.
Does Drilling mud keeps oil underground?Drilling mud is a specialized fluid used in drilling operations to facilitate the drilling process and maintain the stability of the wellbore.
One of the functions of drilling mud is to cool the drill bit by circulating it through the bit and carrying away heat generated during drilling. This helps prevent the bit from overheating and prolongs its lifespan.
Drilling mud acts as a barrier, preventing the gas from entering the wellbore and causing blowouts. It helps control the pressure and allows for safe drilling operations.
Drilling mud has several important functions in drilling operations, including cooling the bit, allowing gas to escape, and flushing cuttings out of the hole. However, it is not intended to keep oil underground.
Learn more about drilling https://brainly.com/question/29219391
#SPJ1
unless otherwise posted, the speed limit in business and residential areas is ____ mph.
unless otherwise posted, the speed limit in business and residential areas is 25 mph.
The max speed at which you are permitted to drive is indicated by a speed limit on the road. I received a $158 fine for going over the speed limit.
While some speed limits are imposed by federal or state legislation, others are decided upon locally and marked on the road. California State Law has certain general principles that include:
In urban areas, 65mph (miles per hour) is the top speed limit.
Any business sector or residential street has a 25 mph speed restriction.
When children are present, the school zone speed restriction is 25 mph.
In alleys, at crossroads, and at train crossings, the speed restriction is 15 mph (where visibility is limited).
To learn more about speed limit
https://brainly.com/question/29632218
#SPJ4
We are capable of building computers that exhibit human-level intelligence. Are there certain areas of application where we should push to accelerate the building of such computers? Why these application areas? Are there certain areas of application we should avoid? Why these application areas?
The idea of creating computers with human-level intelligence has been a topic of discussion for a long time.
While it's an exciting prospect, it's also important to consider the areas where we should push to accelerate the building of such computers.
One area where we should focus on accelerating the building of such computers is the medical field. With the help of these computers, doctors can diagnose diseases more accurately and efficiently, and even predict future health issues. Additionally, these computers can analyze medical data faster, which could lead to the development of new drugs and treatments.
Another area where we can push for the development of human-level intelligent computers is the field of engineering. These computers can simulate complex structures and designs, leading to the creation of better and more efficient machines.
However, there are also certain areas where we should avoid building such computers. For example, creating autonomous weapons or robots with human-level intelligence can have disastrous consequences. Such weapons or robots could make decisions that could harm humans, which is not something we should take lightly.
In conclusion, while the development of computers with human-level intelligence is an exciting prospect, it's important to focus on the areas where they can be used to improve human lives. At the same time, we must be cautious about the potential risks associated with their development in certain areas.
Learn more about data :
https://brainly.com/question/31680501
#SPJ11
Because each of n bits of a number x must be multiplied by each of n bits of a number y, the best big - O bound that any algorithm that multiplies two n-bit numbers can achieve is Q(n + 1) = 2(nº). a. True b. False
The correct option is b. False, as the given big-O bound is incorrect for multiplying two n-bit numbers.
The given big-O bound Q(n + 1) = 2(nº) is incorrect for multiplying two n-bit numbers. The correct big-O bound for this operation is Q(n log n), which is achievable by the Fast Fourier Transform algorithm.
The reason for this is that the number of multiplication operations required for multiplying two n-bit numbers is not exactly n^2, but rather n log n. Therefore, any algorithm that claims to achieve a better big-O bound than Q(n log n) for multiplying two n-bit numbers would be incorrect.
To know more about big-O bound visit:
brainly.com/question/31627354
#SPJ11
prepare in writing a personal plan for combating technological obsolescence. be specific about the things you intend to do and read
Technological obsolescence is the state of being outdated. A personal plan for combating technological obsolescence would entail staying up to date on new technology and trends.
What are the things to consider when creating a plan?1. Research: Research new trends and technologies in the industry to keep up to date on any changes. Read articles, blogs, and white papers about emerging technologies, and attend seminars and conferences to stay up to date.
2. Training: To keep up with new technology, one needs to continue to learn. Take online courses, attend workshops, and complete certification programs to stay up to date on emerging technologies.
3. Networking: Join tech groups, forums, and organizations. Attend webinars, meetups, and other events where you can network with other professionals in the tech industry. Share knowledge and stay up to date on new technologies and trends.
4. Updating your Skills: Learn new skills that are in demand in the tech industry, such as coding, cybersecurity, and AI.5. Staying on top of changes: Always stay updated on technology changes, updates, and new releases in the industry. Take the time to learn about new devices, software updates, and hardware upgrades.
Make sure to read release notes, upgrade guides, and documentation to stay up to date on the latest technology.If you follow these tips and stay dedicated to staying up to date on technology, you can successfully combat technological obsolescence.
Learn more about obsolescence at
https://brainly.com/question/29689688
#SPJ11
.4- The wood structure panel roof diaphragm of a warehouse one-story building is shown in plan view. The calculated roof diaphragm shear capacity is 450 lb/ft in the east-west direction. The roof diaphragm is adequately anchored to the shear wall. a) Calculate the unit shear along the south shear walls b) Calculate the unit shear along the north shear wall c) Calculate the unit shear along the diaphragm in the direction of analysis 40'
The unit shear along the south shear walls is 450 lb/ft.
What is the shear capacity along the south shear walls?The unit shear along the south shear walls of the warehouse one-story building is 450 lb/ft in the east-west direction. Unit shear refers to the shear force per unit length, in this case, per foot, acting on the shear walls. Shear walls play a crucial role in resisting lateral forces and maintaining the structural stability of a building.
In this context, the calculated unit shear of 450 lb/ft indicates the maximum shear force that each foot of the south shear walls can withstand without experiencing excessive deformation or failure. It is important to ensure that the shear walls are designed and constructed to withstand these shear forces adequately.
The adequate anchorage of the roof diaphragm to the shear wall is another important aspect mentioned in the question. Proper anchoring ensures a strong connection between the roof diaphragm and the shear wall, allowing the transfer of shear forces effectively and enhancing the overall structural performance.
By calculating the unit shear, engineers and designers can assess the capacity of the south shear walls to resist the applied forces and ensure the stability and safety of the warehouse building. This information is crucial for designing and evaluating the structural integrity of the building to meet the required safety standards and codes.
Learn more about shear walls
brainly.com/question/32458786
#SPJ11
to be considered a complete warm up cycle, the engine must reach a temperature of
To be considered a complete warm-up cycle, the engine must reach a temperature that is optimal for its efficient and safe operation.
The specific temperature required for a complete warm-up cycle may vary depending on the engine type, fuel used, and other factors. Generally, the engine should reach its normal operating temperature, which is typically around 195-220 degrees Fahrenheit (90-105 degrees Celsius) for most gasoline-powered vehicles. This temperature allows the engine to operate efficiently, burn fuel effectively, and minimize wear and tear on engine components. However, it's important to consult the manufacturer's guidelines or the vehicle's owner's manual for the recommended warm-up temperature specific to your engine model.
Learn more about temperature here
https://brainly.com/question/7510619
#SPJ11
Faster air movement over an airfoil creates a _________ pressure field, which in turn allows lift.
a
Higher
b
Lower
Hai
Your answer will be A.
If you lower the Air Pressure your Object will Float Down ward. The Air Pressure allows it to Fly.
The pressure field created by faster air movement over an airfoil is; A: higher
What is pressure field?When the air hits the front of the wing, the air will flow in a steeper curve upward, than the bottom wing flow which will lead to the creation of a vacuum on top of the wing that pulls more air towards the top of the wing.
Finally, this air above does the same thing but it will move faster as a result of the vacuum pulling it in, and as such the vacuum now lifts the wing. Thus, Faster air movement over an airfoil creates a higher pressure field.
Read more about pressure field at; https://brainly.com/question/14468674
abc hardware store orders one hundred power hand-drills from drilling tools inc. when the hand-drills are delivered, they are all mis
Contact supplier, request cords, delay sales until received.
How to address missing power cords issue?If abc hardware Store has received an order of one hundred power hand-drills from Drilling Tools Inc. without the power cords, they should contact the supplier immediately to inform them of the issue. The store should request that the supplier send the power cords as soon as possible to complete the order. In addition, ABC Hardware Store may need to delay any plans to sell the hand-drills until they have received the missing parts from the supplier. It is important to maintain clear communication with the supplier to ensure that the issue is resolved as quickly and efficiently as possible.
Learn more about hardware Store
brainly.com/question/19581407
#SPJ11
) Compute the total static torque of this feed axis system. (10pts) b) Compute the total dynamic torque of this feed axis system. (10pts) c) What is the total torque that the motor must supply
The feed axis system, shown in the figure below, is driven by a motor with the specifications given in the table below.
Where I is the moment of inertia of the axis, α is the angular acceleration, Fr is the force of resistance to motion, and r is the radius of the axis .Where μ is the coefficient of friction, and Fn is the normal force.
The normal force is the force exerted on the axis by the load, and is equal to the weight of the load. In this case, the weight of the load is 100 N, and therefore the normal force is also 100 N. The coefficient of friction is given as 0.3.
to know about system visit.
https://brainly.com/question/19843453
#SPJ11
Take a class Person having two attributes name and age. Include a parametrized constructor to give values to all data members. In main function i. Create an instance of the person class and name it person1. ii. Create a binary file person.bin and write person1 object into it. iii. Read the person1 object from the file. iv. Return 0
Here's an example implementation of the Person class with a parameterized constructor and methods for writing and reading objects to/from a binary file:
import java.io.*;
public class Person implements Serializable {
private String name;
private int age;
public Person(String name, int age) {
this.name = name;
this.age = age;
}
public void writeToFile(String fileName) throws IOException {
FileOutputStream fos = new FileOutputStream(fileName);
ObjectOutputStream oos = new ObjectOutputStream(fos);
oos.writeObject(this);
oos.close();
fos.close();
System.out.println("Person object written to file " + fileName);
}
public static Person readFromFile(String fileName) throws IOException, ClassNotFoundException {
FileInputStream fis = new FileInputStream(fileName);
ObjectInputStream ois = new ObjectInputStream(fis);
Person person = (Person) ois.readObject();
ois.close();
fis.close();
System.out.println("Person object read from file " + fileName);
return person;
}
public String toString() {
return "Name: " + name + ", Age: " + age;
}
public static void main(String[] args) {
Person person1 = new Person("John Doe", 30);
try {
person1.writeToFile("person.bin");
Person person2 = Person.readFromFile("person.bin");
System.out.println(person2.toString());
} catch (IOException e) {
e.printStackTrace();
} catch (ClassNotFoundException e) {
e.printStackTrace();
}
}
}
In this implementation, the Person class implements the Serializable interface. The parameterized constructor takes in values for the name and age attributes.
The writeToFile() method writes the current Person object to a binary file using the ObjectOutputStream class. The readFromFile() method reads a Person object from a binary file using the ObjectInputStream class.
In the main function, we create an instance of Person named person1, write it to a binary file called "person.bin", read it back from the file into a new object person2, and then print out the toString() representation of person2.
Note that writing and reading objects to/from binary files in Java requires handling IOException and ClassNotFoundException exceptions.
learn more about binary file here
https://brainly.com/question/31203822
#SPJ11
Tech a says that a failed harmonic balancer can cause a crankshaft to break. tech b says that the crankshaft rod journals are typically measured using a dial indicator. who is correct?
Technician A is correct as he says that a failed harmonic balancer can cause a crankshaft to break.
Why would a harmonic balancer be used?Harmonic balancers are misnamed. They do not balance an engine; rather, they absorb and eliminate unwelcome vibration brought on by the crankshaft's torsional twisting. They are sometimes referred to as dampeners although in reality they are vibration dampeners.The engine will shake significantly if the harmonic balancer becomes too old or malfunctions and is unable to adequately absorb the harmonic vibrations. At high speeds, the shaking will become significantly more obvious and harmful to the engine. A failed harmonic balancer can cause a crankshaft to break.Oil and other fluids are the harmonic dampener's natural adversaries. The rubber or elastomeric components of the dampener can become coated with a crankshaft seal leak, which will damage it. The rubber may also bulge, shrink, or break as a result of things like leaking valve covers, power steering pumps, and air conditioning compressor oil.To learn more about the harmonic balancer, refer to:
https://brainly.com/question/14097215
#SPJ4
An engine has been diagnosed with blowby. Technician a says the engine could have a cracked flywheel. Technician b says the compression rings could be worn. Who is right?.
When an engine has been diagnosed with blowby, technician B is only correct who states that the compression rings could be worn.
Engine blowby happens when a mixture of combustion gases or air-fuel leaks between the pistons and cylinder wall into the crankcase of the engine because of the lose pistons's rings. Engine blowby can occur within both gas and diesel engines. Minor levels of engine blowby are normal but excessive levels of engine blowby are an indicator of larger issues. So technician B says correctly.
While technician A is not right to say that a cracked flywheel could be a reason for the blowby engine.
You can learn more about engine blowby at
https://brainly.com/question/4015642
#SPJ4
1. a clock is logic 0 for 20 ns and logic 1 for 50 ns. a) (2 points) what is the period t? b) (2 points) what is frequency f? c) (2 points). what is the duty cycle? 2. (3 points) briefly explain the difference between a combinational and a sequential digital circuit. - 3. (3 points) briefly explain the difference between a level-triggered device and an edge triggered device. - 4. (3 points) for latch circuits, briefly describe the significance of a setup time and a hold time. -
An inverter is added to the D-type set-reset flip-flop to prevent the S and R inputs from being at the same level of logic.
What is the duty cycle?
The fraction of a period during which a signal or system is active is referred to as a duty cycle or power cycle. Typically, duty cycle is expressed as a percentage or a ratio. The time it takes for a signal to complete an on-and-off cycle is called a period.
Briefly explain the difference between a combinational and a sequential digital circuit ?
The output of a combinational circuit is independent of time and only depends on the input that is present at that particular instant. The output of a sequential circuit is dependent not only on the current input but also on the previous output.
Briefly describe the significance of a setup time and a hold time. -
When level triggering is used, the circuit will turn on when the gating or clock pulse reaches a specific level. The clock signal is negative or positive edges activate the circuit in edge triggering. The time it takes for a Flip-Flop's input to stabilize before a clock edge is called setup time. Hold time deals with things that happen after a clock edge, unlike setup time.
Learn more about Digital circuit :
brainly.com/question/29396299
#SPJ4
Write the following argument in argument form and use the rules of inference to show that the argument is valid. If it snows, then I take the subway. I am late for work when I take the subway. I was not late for work. Therefore, it did not snow.
Thus, if it snows, I use the metro. Finally, p->r————if it snows and I am late to work because q->r————when I take the train then I am behind schedule. Well, at last! There is not snow, so p.
What does "work" mean to you?Activity that a man habitually engages in to make a living: activity whereby a person uses strength or intellect to do or do anything. persons seeking employment.
Do jobs imply work?In conclusion, we may conclude that the term "job" refers to a specific employment function or function, such as that of a cook, teacher, or banker, but the term "work" refers more broadly to the activities you engage in. Contrary to popular belief, not all occupations need you to perform work.
To know more about work visit:
https://brainly.com/question/29664259
#SPJ4
Chọn dữ liệu phù hợp và biểu diễn chúng dưới dạng biểu đồ, từ đó cho biết 3 yếu tố
mà người dùng xem xét nhiều nhất khi mua một chiếc tablet.
Answer:
Please explain it in English so that i can help you or you need someone who can speak Vietnam help you
A 150-lbm astronaut took his bathroom scale (a
spring scale) and a beam scale (compares masses) to the
moon where the local gravity is g ! 5.48 ft/s2
. Determine
how much he will weigh (a) on the spring scale and (b) on
the beam scale.
Given the following data:
Mass of astronaut = 150-lbm.
Acceleration due to gravity on Moon = 5.48 ft/s².
What is weight?Weight can be defined as the force acting on an object or a physical body due to the effect of gravity. Also, the weight of a physical object (body) is typically measured in Newton or ounces.
How to calculate the weight of this astronaut?Mathematically, the weight force on a physical body can be calculated by using this formula:
W = mg
Where:
W represents the weight.m represents the mass.g represents the acceleration due to gravity.Substituting the given parameters into the formula, we have;
Weight = 150 × 1/32.2 × 5.48
Weight = 25.5 lbf.
For the weight on beam scale.A beam scale is a measuring instrument that is designed and developed to compare the masses of a physical body and as such, it's not affected by the variations in acceleration due to gravity. Therefore, the beam scale would read 150-lbf as it read on earth.
Read more on weight here: brainly.com/question/13833323
#SPJ1
Redirection and Pipes Unix Questions1. Give a command to run the program "my-program", but redirecting the input from a file called "input.txt" and redirecting the output to a file called "output.txt".2. Using pipes, give a command which lists all of the process identifiers for all processes running on a machine which contain the text "you". The output should be only the process identifiers.
1. To run "my-program" with input from "input.txt" and output to "output.txt", use the following command:
```my-program < input.txt > output.txt
```
2. To list all process identifiers containing the text "you" using pipes, use this command:
```ps -ef | grep 'you' | awk '{print $2}'
```This command utilizes `ps -ef` to display processes, `grep` to filter processes containing "you", and `awk` to extract and display only the process identifiers.
1. The command to run the program "my-program" while redirecting input from a file called "input.txt" and output to a file called "output.txt" is:
```
$ my-program < input.txt > output.txt
```
This command will take the input from the file "input.txt" instead of the standard input (keyboard) and will redirect the output to the file "output.txt" instead of the standard output (screen).
2. The command to list all the process identifiers for all processes running on a machine that contain the text "you" using pipes is:
```
$ ps -ef | grep "you" | awk '{print $2}'
```
This command will first list all the processes running on the machine using the "ps -ef" command. Then, it will filter out only the processes that contain the text "you" using the "grep" command. Finally, it will use the "awk" command to print only the second field (process identifier) of each matching process.
Learn more about input here:-
https://brainly.com/question/20295442
#SPJ11